Mencakup 分配盘, press sleeve, seal ring dan 87 nomor part asli. Cari berdasarkan nomor part atau nama; kami memverifikasi terhadap gambar sebelum pengiriman untuk menghindari salah kirim.
Ketik nomor part atau nama untuk memfilter. Jika part tidak tercantum, hubungi kami dan kami akan memeriksanya di katalog.
| No. Part | Nama |
|---|---|
| 4100.0047.01 | K3103-15 clamp bar |
| 4100.0085.01 | K3105.1.1-1 fixed-jaw wedge body |
| 4100.0097.01 | K3105.1.7-1 front-wall wedge body |
| 4100.0110.01 | K3105.1-23 seal ring ( flywheel 端) |
| 4100.0111.01 | K3105.1-25 seal ring ( flywheel 端) |
| 4100.0114.01 | K3105.1-28 seal ring ( sheave 端) |
| 4100.0115.01 | K3105.1-29 seal ring ( sheave 端) |
| 4100.0140.01 | K3105.2.3-1 wedge 体 |
| 4100.0145.01 | K3105.2-14 seal ring |
| 4100.0166.01 | K3105.2-5 end cover |
| 4100.0168.01 | K3105.2-7 movable-jaw guard |
| 4100.0179.01 | K3105.4-2 adjusting seat |
| 4100.0393.01 | K3306-15 movable jaw 密封盖(一) |
| 4100.0944.01 | K31X06-40 adjusting seat |
| 4100.0945.01 | K31X10-11 adjusting seat |
| 4100.1647.01 | K3605AG.03-2 支承座 |
| 4100.2064.01 | K1308.2-6 countershaft frame guard plate |
| 4100.2122.01 | K1308.8-3 上扇形板 |
| 4100.2160.01 | K1312.1-10 填块 |
| 4100.2245.01 | K1313.1-2 填块 |
| 4100.2248.01 | K1314.1-2 填块 |
| 4100.2351.01 | K1411.5-2 分配盘 |
| 4100.2353.01 | K1411.5-4 press sleeve |
| 4100.2406.01 | K1413.1-3 press sleeve |
| 4100.2407.01 | K1413.1-4 分配盘 |
| 4100.2423.01 | K1414.01.07 底托盖 |
| 4100.2462.01 | K1414.05.06 press sleeve |
| 4100.2465.01 | K1414.05.09 分配盘 |
| 4100.2523.01 | K1414.09.01 上扇板 |
| 4100.2525.01 | K1414.09.03 下扇板 |
| 4100.2531.01 | K1414.12.02 上扇形板 |
| 4100.2532.01 | K1414.12.03 下扇形板 |
| 4100.2543.01 | K1416.01.04 press sleeve |
| 4100.2544.01 | K1416.01.05 分配盘 |
| 4100.2570.01 | K1417.1.0.12 底盖 |
| 4100.2631.01 | K1417.5.0.07 press sleeve |
| 4100.2634.01 | K1417.5.0.09 分配盘 |
| 4100.2694.01 | K1419.1.0.03 press sleeve |
| 4100.2695.01 | K1419.1.0.04 分配盘 |
| 4100.2773.01 | K1420.5-7 press sleeve |
| 4100.2775.01 | K1420.5-9 分配盘 |
| 4100.2831.01 | K1422.1-3 press sleeve |
| 4100.2832.01 | K1422.1-4 分配盘 |
| 4100.4107.01 | K5806II.3-12 锤柄 |
| 4100.4141.01 | K5803-1A motor pulley |
| 4100.4244.01 | K5802.1.1-5 螺纹卡 sleeve |
| 4100.4269.01 | K5803.1.3-9 pulley |
| 4100.4350.01 | K5803.1.1-2 shaft sleeve |
| 4100.4555.01 | G-D311151200 liner plate (后部) |
| 4100.4557.01 | G-D351151200 liner plate (后部) |
| 4100.4560.01 | G-D311151101 liner plate (前部) |
| 4100.4562.01 | G-D351151101 liner plate (前部) |
| 4100.6913.01 | K3903.7-5 flywheel |
| 4100.8072.01 | K3904.1.1-9 卡箍 |
| 4100.8356.01 | K3906.4-7 seal sleeve |
| 4100.8359.01 | K3904.1.1-21 seal sleeve (I) |
| 4100.8360.01 | K3904.1.1-8 seal sleeve (II) |
| 4100.8525.01 | K3900.1-8 collar |
| 4100.8788.01 | K3903.7-4 小带轮 |
| 4100.9226.01 | K3907.2-12 shaft sleeve |
| 4200.1351.01 | K1202.1-13 铲刀架 |
| 4200.1352.01 | K1203.1-14 铲刀架 |
| 4200.1353.01 | K1202.1-18 铲刀座 |
| 4200.1485.01 | K1203A.1.8-13 横担头 |
| 4200.1490.01 | K1202.1.08-13 横弹头 |
| 4200.1583.01 | K1202.1-17 梅花架 |
| 4200.1584.01 | K1203.1-19 梅花架 |
| 4200.1637.01 | K1203.1-3 瓦盖 |
| 4200.1734.01 | K1203.1-13 中心轴架 |
| 4200.3334.01 | K3105HA.2.2 movable jaw |
| 4200.4568.01 | K1312.2.1-4 countershaft frame sleeve |
| 4200.4570.01 | K1312.2.1-9 千斤顶座 |
| 4200.4809.01 | K1602.01-07 臂 guard plate |
| 4200.4831.01 | K1602.02-4 guard plate (一) |
| 4200.4832.01 | K1602.02-5 guard plate (二) |
| 4200.4952.01 | K1601.01-03 臂 guard plate |
| 4200.4964.01 | K1601.02-05 guard plate |
| 4200.4965.01 | K1601.02-06 guard plate |
| 4200.6313.01 | K3321-19a toggle plate |
| 4200.6814.01 | K3906.1.5 横梁(二) |
| 4200.6815.01 | K3906.4-20 大带轮 |
| 4200.7064.01 | K3322.1-1 前墙 |
| 4300.5694.01 | CQ06.01-03 车轮 |
| 4300.5916.01 | K4010.2-4 端部圆盘 |
| 5100.0184.01 | K4106us.1-4 bearing housing |
| 5100.0451.01 | K5125.3-8 bearing housing |
| 5100.0452.01 | K5125.8-1 bearing housing |
Kirimkan daftar nomor part dan alamat pengiriman; kami akan memeriksa stok dan gambar lalu membalas dalam 24 jam dengan harga satuan, waktu kirim, dan dokumen ekspor.