All part numbers and descriptions for this machine, grouped by assembly — 161 items. We verify against drawings before shipping to avoid mismatch.
Items are grouped by assembly. Use the search box to filter the whole page by part number or description.
| Part No. | Description |
|---|---|
| 4200.4852.01 | pinion |
| 4200.4853.01 | retainer ring II |
| 4200.4854.01 | bearing cap II |
| 4200.4855.01 | 垫 |
| 4200.4856.01 | 主机 pulley |
| 4200.4857.01 | taper sleeve |
| 4200.4858.01 | shaft-end ring |
| 4200.4859.01 | press sleeve |
| 4200.4860.01 | countershaft |
| 4200.4861.01 | countershaft frame |
| 4200.4862.01 | 垫 |
| 4200.4863.01 | retainer ring I |
| 4200.4864.01 | bearing cap I |
| 4200.4865.01 | 垫 |
| 4200.4866.01 | 油管 |
| 4200.4867.01 | 油堵 |
| 4200.6580.01 | O形圈 φ内34.2×3 |
| 4200.6592.01 | O形圈 (φ内84.1×5.7) |
| 4200.6594.01 | O形圈 φ内99.1×5.7 |
| 8100.0167.01 | washer 12 |
| 8100.0229.01 | washer 16 |
| 8100.0229.01 | washer 16 |
| 8100.0229.01 | washer 16 |
| 8100.0229.01 | washer 16 |
| 8100.0229.01 | washer 16 |
| 8100.0317.01 | nut M16 |
| 8100.0790.01 | bolt M12×30 |
| 8100.0921.01 | 内外丝 elbow 20 |
| 8100.1080.01 | bolt M16×40 |
| 8100.1080.01 | bolt M16×40 |
| 8100.1080.01 | bolt M16×40 |
| 8100.2734.01 | bolt M16×65 |
| 8100.2734.01 | bolt M16×65 |
| 8100.2734.01 | bolt M16×65 |
| 8100.2880.01 | bearing (φ110×φ180×56) |
| 8100.2881.01 | bearing (φ110×φ240×80) |
| 8100.2883.01 | 普通平键 C28×118 |
| 8100.2884.01 | 销8×28 |
| 8100.2885.01 | retaining ring 85 |
| 8100.2886.01 | 锥接头 20-M33×2(R3/4) |
| 8100.2887.01 | 磁性 plug screw R3/4 |
| 8100.2909.01 | bolt M16×120 |
| 8100.3037.01 | oil seal 130×160×12 |
| 8100.3037.01 | oil seal 130×160×12 |
| 8100.3333.01 | washer 16 |
| 8100.4127.01 | 键B22×14×95 |
| Part No. | Description |
|---|---|
| 4200.4809.01 | 臂 guard plate |
| 4200.4810.01 | 上 frame liner plate sleeve |
| 4200.4811.01 | oil seal |
| 4200.4812.01 | 顶盖 |
| 4200.4823.01 | 大 washer |
| 4200.4824.01 | 碟簧 sleeve |
| 4200.6586.01 | O型圈 φ内499.3×5.7 |
| 4200.6589.01 | steel plate φ25×6 |
| 8100.0175.01 | washer 30 |
| 8100.0233.01 | washer 20 |
| 8100.0377.01 | bolt M20×90 |
| 8100.0573.01 | washer 42 |
| 8100.1105.01 | bolt M42×220 |
| 8100.2374.01 | oil cup 45° M10×1 |
| 8100.2870.01 | 放气阀C |
| 8100.2872.01 | stud AM20×60 |
| 8100.2873.01 | bolt M30×360 |
| 8100.2876.01 | 碟簧A90-1 |
| 8100.3905.01 | nut M20 |
| 8100.3911.01 | nut M42 |
| Part No. | Description |
|---|---|
| 4200.4838.01 | 轴瓦 |
| 4200.4845.01 | mantle A |
| 4200.4870.01 | 碗形瓦垫 |
| 4200.4871.01 | 摩擦板 |
| 4200.4886.01 | 垫 |
| 4200.4887.01 | backing plate |
| 4200.4888.01 | backing plate |
| 4200.4889.01 | shim set |
| 4200.4890.01 | 定位条 |
| 4200.4891.01 | 密封架 |
| 4200.4892.01 | 密封盖 |
| 8100.0155.01 | spring washer 16 |
| 8100.0229.01 | washer 16 |
| 8100.0358.01 | bolt M16×60 |
| 8100.1312.01 | bolt M16×80 |
| 8100.2896.01 | bolt M10×45 |
| Part No. | Description |
|---|---|
| 4200.4810.01 | 上 frame liner plate sleeve |
| 4200.4811.01 | oil seal |
| 4200.4812.01 | 顶盖 |
| 4200.4830.01 | frame bush |
| 4200.4831.01 | guard plate (一) |
| 4200.4832.01 | guard plate (二) |
| 4200.4835.01 | shaft sleeve |
| 4200.4852.01 | pinion |
| 4200.4875.01 | V O-ring |
| 4200.4878.01 | bull gear |
| 4200.4880.01 | eccentric sleeve |
| 8100.2880.01 | bearing (φ110×φ180×56) |
| 8100.2881.01 | bearing (φ110×φ240×80) |
| Part No. | Description |
|---|---|
| 4200.4828.01 | 下 frame |
| 4200.4829.01 | press ring |
| 4200.4830.01 | frame bush |
| 4200.4831.01 | guard plate (一) |
| 4200.4832.01 | guard plate (二) |
| 4200.4833.01 | 方 nut |
| 4200.4834.01 | 盖 |
| 8100.0160.01 | washer 12 |
| 8100.0790.01 | bolt M12×30 |
| 8100.2877.01 | 销16×45 |
| 8100.2878.01 | 销12×30 |
| Part No. | Description |
|---|---|
| 3900.1538.01 | mantle 组件A |
| 4200.4835.01 | shaft sleeve |
| 4200.4839.01 | 头部 nut (内部) |
| 4200.4840.01 | 头部 nut (外部) |
| 4200.4841.01 | O形圈 |
| 4200.4842.01 | main shaft |
| 4200.4843.01 | 固定板 |
| 4200.4844.01 | rubber 板 |
| 6002.0079.01 | packing - epoxy resin |
| 8100.0229.01 | washer 16 |
| 8100.2734.01 | bolt M16×65 |
| Part No. | Description |
|---|---|
| 3900.1503.01 | eccentric sleeve assembly |
| 3900.1505.01 | 密封部 |
| 4200.4801.01 | motor Y355M2-4-250Kw 380V IP44 |
| 4200.4802.01 | motor pulley |
| 4200.4894.01 | motor base |
| 8100.1184.01 | washer 27 |
| 8100.2380.01 | washer 27 |
| 8100.2869.01 | bolt M27X220 |
| 8100.3130.01 | bolt M27×130 |
| 8100.3361.01 | 普通V带 C Le＝5918 |
| Part No. | Description |
|---|---|
| 4200.4836.01 | retaining ring |
| 4200.4837.01 | 固定 retainer ring |
| 4200.4838.01 | 轴瓦 |
| 4200.4851.01 | cone body |
| 8100.0043.01 | bolt M16×55 |
| 8100.1488.01 | 轴用 retaining ring 100 |
| 8100.2879.01 | 销25×60 |
| Part No. | Description |
|---|---|
| 3900.1544.01 | 偏心 bush 组件A |
| 4200.4878.01 | bull gear |
| 4200.4879.01 | 键 |
| 4200.4880.01 | eccentric sleeve |
| 8100.0160.01 | washer 12 |
| 8100.2893.01 | 键25×14×250 |
| 8100.2895.01 | bolt M12×70 |
| Part No. | Description |
|---|---|
| 上 frame 部 | |
| crushing cone assembly | |
| 3900.1501.01 | 下 frame 部 |
| 3900.1502.01 | 传动部 |
| 3900.1506.01 | 液压缸部 |
| 4300.5701.01 | 进料斗 (EC腔) |
| Part No. | Description |
|---|---|
| 4200.4820.01 | 上 frame |
| 4200.4821.01 | concave (bowl liner) 压紧环 |
| 4200.4822.01 | pin |
| 4200.4827.01 | bolt |
| 6002.0079.01 | packing - epoxy resin |
| Part No. | Description |
|---|---|
| 4200.4884.01 | clamp plate |
| 4200.4885.01 | 配重 |
| 8100.0167.01 | washer 12 |
| 8100.2894.01 | bolt M12×50 |
| 8100.3930.01 | bolt M12×40 |
| Part No. | Description |
|---|---|
| 4200.4809.01 | 臂 guard plate |
| 4200.4840.01 | 外头部 nut |
| 4200.4881.01 | 偏心 bush A |
| Part No. | Description |
|---|---|
| 4200.4813.01 | concave (bowl liner) A |
Send part numbers and quantities; we will check stock and drawings and reply with unit prices, lead times and export shipping. Genuine part numbers remain available long term.