Covers liner plate, toggle seat, washer and 794 genuine part numbers. Search by part number or description; we verify against drawings before shipping.
Type a part number or description to filter. If a part is not listed, contact us and we will check it against the catalogue.
| Part No. | Description |
|---|---|
| 3100.0283.01 | H-45HDIS-S4B 均给防 guard plate |
| 4100.0021.01 | K3101-25 shaft sleeve |
| 4100.0022.01 | K3101-26 shaft sleeve |
| 4100.0032.01 | K3101-5 toggle seat |
| 4100.0034.01 | K3101-7 toggle seat |
| 4100.0039.01 | K3103.HA-1 顶头 |
| 4100.0040.01 | K3103.HA-4A clamp plate |
| 4100.0053.01 | K3103-22 调整 backing plate |
| 4100.0054.01 | K3103-23 调整 backing plate |
| 4100.0056.01 | K3103-25 sleeve |
| 4100.0057.01 | K3103-26 washer |
| 4100.0059.01 | K3103-28 washer |
| 4100.0077.01 | K3103-46 压铁 |
| 4100.0148.01 | K3105.2-17(组件)-1 配重块 |
| 4100.0155.01 | K3105.2-23 toggle seat |
| 4100.0196.01 | 紫铜管8×1 |
| 4100.0205.01 | K3107-11A movable-jaw guard |
| 4100.0208.01 | K3107-14δ10 adjusting shim (一) |
| 4100.0211.01 | K3107-18 sleeve |
| 4100.0216.01 | K3107-23 斜铁 |
| 4100.0229.01 | K3107-5 upper side liner |
| 4100.0251.01 | K3124-15 washer |
| 4100.0253.01 | K3124-17 washer |
| 4100.0267.01 | K3124-31 toggle seat |
| 4100.0269.01 | K3124-34 toggle seat |
| 4100.0275.01 | K3124-6 adapter sleeve |
| 4100.0277.01 | K3124-8 shaft sleeve |
| 4100.0278.01 | K3124-9 shaft sleeve |
| 4100.0292.01 | K3126-04-02 washer |
| 4100.0294.01 | K3126-04-04 washer |
| 4100.0300.01 | K3126-60-2 steel plate |
| 4100.0301.01 | K3126-60-3 分油器 |
| 4100.0309.01 | K3126C-15 顶头 |
| 4100.0311.01 | K3126C-20 挡盘 |
| 4100.0312.01 | K3126C-28 shaft-end ring |
| 4100.0317.01 | K3126C-32 angle steel |
| 4100.0320.01 | K3126C-35A toggle seat |
| 4100.0322.01 | K3126C-38A toggle seat |
| 4100.0323.01 | K3126C-39A clamp plate |
| 4100.0325.01 | K3126C-41b upper side liner |
| 4100.0335.01 | K3126H-20 配重块 |
| 4100.0337.01 | K3126H-22 pressing block |
| 4100.0342.01 | K3126H-30 movable-jaw guard |
| 4100.0347.01 | K3126H-9 movable jaw through cover |
| 4100.0357.01 | K3204-47B 三角板 |
| 4100.0361.01 | K3206-10 spring seat (一) |
| 4100.0362.01 | K3206-11 toggle seat (二) |
| 4100.0363.01 | K3206-12 adjusting seat |
| 4100.0369.01 | K3206-17 spring seat (二) |
| 4100.0374.01 | K3206-28 retaining ring |
| 4100.0378.01 | K3206-4 pin A48×100 |
| 4100.0389.01 | K3206-8G(试) toggle plate |
| 4100.0401.01 | K3306-6 导向板 |
| 4100.0434.01 | K3603.02.05-2 把手 |
| 4100.0456.01 | K31X04-36 angle steel |
| 4100.0478.01 | K3602.03-1 长 nut |
| 4100.0528.01 | K3611.6-10 liner plate |
| 4100.0529.01 | K3611.6-11 liner plate |
| 4100.0530.01 | K3611.6-12 liner plate |
| 4100.0531.01 | K3611.6-13 liner plate |
| 4100.0532.01 | K3611.6-14 liner plate |
| 4100.0533.01 | K3611.6-15 liner plate |
| 4100.0534.01 | K3611.6-16 liner plate |
| 4100.0535.01 | K3611.6-18 liner plate |
| 4100.0536.01 | K3611.6-19 liner plate |
| 4100.0537.01 | K3611.6-2 liner plate |
| 4100.0538.01 | K3611.6-3 liner plate |
| 4100.0539.01 | K3611.6-4 liner plate |
| 4100.0540.01 | K3611.6-5 liner plate |
| 4100.0541.01 | K3611.6-6 liner plate |
| 4100.0542.01 | K3611.6-7 liner plate |
| 4100.0543.01 | K3611.6-8 liner plate |
| 4100.0544.01 | K3611.6-9 liner plate |
| 4100.0574.01 | K3618.6-1 liner plate |
| 4100.0575.01 | K3618.6-2 liner plate |
| 4100.0576.01 | K3618.6-3 liner plate |
| 4100.0577.01 | K3618.6-4 liner plate |
| 4100.0578.01 | K3618.6-6 liner plate |
| 4100.0579.01 | K3618.6-7 liner plate |
| 4100.0580.01 | K3618.6-8 liner plate |
| 4100.0586.01 | K3636.2-27 liner plate (八) |
| 4100.0587.01 | K3637.2-27 liner plate (八) |
| 4100.0592.01 | K3636.2-21 liner plate (二) |
| 4100.0594.01 | K3637.2-21 liner plate (二) |
| 4100.0600.01 | K3636.2-39 liner plate (二十) |
| 4100.0601.01 | K3637.2-39 liner plate (二十) |
| 4100.0605.01 | K3636.2-41 liner plate (二十二) |
| 4100.0606.01 | K3637.2-41 liner plate (二十二) |
| 4100.0611.01 | K3637.2-43 liner plate (二十三) |
| 4100.0616.01 | K3636.2-40 liner plate (二十一) |
| 4100.0617.01 | K3637.2-40 liner plate (二十一) |
| 4100.0620.01 | K3636.2-28 liner plate (九) |
| 4100.0621.01 | K3637.2-28 liner plate (九) |
| 4100.0628.01 | K3636.2-26 liner plate (七) |
| 4100.0629.01 | K3637.2-26 liner plate (七) |
| 4100.0633.01 | K3636.2-22 liner plate (三) |
| 4100.0635.01 | K3637.2-22 liner plate (三) |
| 4100.0640.01 | K3639.2-55 liner plate (三十八) |
| 4100.0642.01 | K3639.2-56 liner plate (三十九) |
| 4100.0644.01 | K3639.2-54 liner plate (三十七) |
| 4100.0650.01 | K3636.2-29 liner plate (十) |
| 4100.0651.01 | K3637.2-29 liner plate (十) |
| 4100.0654.01 | K3636.2-37 liner plate (十八) |
| 4100.0655.01 | K3637.2-37 liner plate (十八) |
| 4100.0658.01 | K3636.2-31 liner plate (十二) |
| 4100.0659.01 | K3637.2-31 liner plate (十二) |
| 4100.0662.01 | K3636.2-38 liner plate (十九) |
| 4100.0663.01 | K3637.2-38 liner plate (十九) |
| 4100.0666.01 | K3636.2-35 liner plate (十六) |
| 4100.0667.01 | K3637.2-35 liner plate (十六) |
| 4100.0670.01 | K3636.2-36 liner plate (十七) |
| 4100.0671.01 | K3637.2-36 liner plate (十七) |
| 4100.0674.01 | K3636.2-32 liner plate (十三) |
| 4100.0675.01 | K3637.2-32 liner plate (十三) |
| 4100.0678.01 | K3636.2-33 liner plate (十四) |
| 4100.0679.01 | K3637.2-33 liner plate (十四) |
| 4100.0682.01 | K3636.2-34 liner plate (十五) |
| 4100.0683.01 | K3637.2-34 liner plate (十五) |
| 4100.0686.01 | K3636.2-30 liner plate (十一) |
| 4100.0687.01 | K3637.2-30 liner plate (十一) |
| 4100.0690.01 | K3636.2-23 liner plate (四) |
| 4100.0691.01 | K3637.2-23 liner plate (四) |
| 4100.0694.01 | K3639.2-57 liner plate (四十) |
| 4100.0695.01 | K3639.2-59 liner plate (四十二) |
| 4100.0696.01 | K3639.2-58 liner plate (四十一) |
| 4100.0698.01 | K3636.2-24 liner plate (五) |
| 4100.0699.01 | K3637.2-24 liner plate (五) |
| 4100.0762.01 | K3611.1.2-4 spring bracket |
| 4100.0767.01 | K3618.1.2-4 spring support |
| 4100.0780.01 | K3618.4-15 baffle plate |
| 4100.0923.01 | K31X02-17 调整 backing plate |
| 4100.0924.01 | K31X04-17 调整 backing plate |
| 4100.0925.01 | K31X06-17 调整 backing plate |
| 4100.0950.01 | K31X04-18 顶头 |
| 4100.0955.01 | K3602.01-2 locating block |
| 4100.0976.01 | K31X04-14 movable-jaw guard |
| 4100.0977.01 | K31X06-14 movable-jaw guard |
| 4100.0991.01 | K3611.4Z-4 end cover |
| 4100.0992.01 | K3618.4-13 end cover |
| 4100.1066.01 | K3605A-8 封板φ40×6 |
| 4100.1076.01 | K3611.4C-1 盖 |
| 4100.1122.01 | K3618.7-5 隔 sleeve |
| 4100.1188.01 | K31X04.2-3 slide block |
| 4100.1225.01 | K31X02-29 adapter sleeve |
| 4100.1227.01 | K31X06-35 adapter sleeve |
| 4100.1228.01 | K31X10-28 adapter sleeve |
| 4100.1360.01 | K3605BS.2-1 blind cover |
| 4100.1377.01 | K3611.5-7 密封盖 |
| 4100.1378.01 | K3618.5-6 密封盖 |
| 4100.1448.01 | K31X04-38 三角板 |
| 4100.1473.01 | K3602.04-8 锁紧块 |
| 4100.1474.01 | K3605AS.04-19A 锁紧块 |
| 4100.1476.01 | K3636.1-7 锁紧块(二) |
| 4100.1477.01 | K3637.1-7 锁紧块(二) |
| 4100.1480.01 | K3636.1-6 锁紧块(一) |
| 4100.1481.01 | K3637.1-6 锁紧块(一) |
| 4100.1485.01 | K31X02-19 sleeve |
| 4100.1487.01 | K31X10-14 sleeve |
| 4100.1558.01 | K3602-3 pin |
| 4100.1607.01 | K31X10-23 斜铁 |
| 4100.1608.01 | K31X02-39 clamp plate |
| 4100.1609.01 | K31X04-42 clamp plate |
| 4100.1614.01 | K3611.4C-3 压紧块 |
| 4100.1692.01 | K3618.7-1 shaft-end plate |
| 4100.1699.01 | K3637.6-14 shaft-end plate (二) |
| 4100.1703.01 | K3637.6-4 shaft-end plate (一) |
| 4100.1705.01 | K31X02-36 shaft-end ring |
| 4100.1706.01 | K31X04-30 shaft-end ring |
| 4100.1708.01 | K31X06-31 shaft-end ring |
| 4100.1711.01 | K3611.4-4 shaft sleeve |
| 4100.1712.01 | K3618.4-3 shaft sleeve |
| 4100.1717.01 | K3618.7-4 shaft sleeve (I) |
| 4100.1718.01 | K3903.7-12 shaft sleeve (II) |
| 4100.1719.01 | D560S045-8 shaft sleeve II |
| 4100.1724.01 | K31X02-5 toggle seat |
| 4100.1725.01 | K31X02-9 toggle seat |
| 4100.1726.01 | K31X04-4 toggle seat |
| 4100.1727.01 | K31X04-8 toggle seat |
| 4100.1728.01 | K31X06-4 toggle seat |
| 4100.1729.01 | K31X06-8 toggle seat |
| 4100.1730.01 | K31X10-10 toggle seat |
| 4100.1731.01 | K31X10-8 toggle seat ( movable jaw ) |
| 4100.1820.01 | K3131-12a 顶尖 |
| 4100.1821.01 | K3131-13a 螺 sleeve |
| 4100.1848.01 | K3131-37a 楔铁 |
| 4100.1851.01 | K3131-3a guard plate |
| 4100.1866.01 | K3131GJ-1 round nut 扳手M440×6 |
| 4100.1867.01 | K3131GJ-2 round nut 扳手M520×6 |
| 4100.1906.01 | K3135-3 guard plate |
| 4100.1922.01 | K3135-49 washer |
| 4100.1925.01 | K3135-52 sleeve |
| 4100.1928.01 | K3135-55 washer |
| 4100.1929.01 | K3135-56 sleeve |
| 4100.1951.01 | K3208-12a sleeve |
| 4100.1953.01 | K3208-20a spring seat (一) |
| 4100.1955.01 | K3208-22a spring seat (二) |
| 4100.1959.01 | K3208-27a 压铁 |
| 4100.1962.01 | K3208-45a 偏心块 |
| 4100.1964.01 | K3208-4a sleeve |
| 4100.1990.01 | K3306-8S 右 side liner |
| 4100.1993.01 | K3306-7S 左 side liner |
| 4100.2052.01 | K1308.1-9 上圆盘 |
| 4100.2060.01 | K1308.2-3 耐磨环 |
| 4100.2065.01 | K1308.2-7 countershaft |
| 4100.2084.01 | K1308.5-6 切割环 |
| 4100.2086.01 | K1308.5-8 止动轮 |
| 4100.2089.01 | K1308.6.1-1 clamp plate |
| 4100.2170.01 | K1312.14.2 千斤顶防护卡 |
| 4100.2172.01 | K1312.14-1 上推杆 |
| 4100.2173.01 | K1312.14-2 下推杆 |
| 4100.2177.01 | K1312.1-5 切割环 |
| 4100.2200.01 | K1312.3-6 dust seal press ring |
| 4100.2206.01 | K1312.4-3 调整帽 seal ring clamp plate |
| 4100.2210.01 | K1312.5-12 耐磨环 |
| 4100.2211.01 | K1312.5-2 countershaft |
| 4100.2224.01 | K1312.6-6 上推力板 |
| 4100.2226.01 | K1312.6-8 shim set |
| 4100.2269.01 | K1320.1-3 U形 screw backing plate |
| 4100.2271.01 | K1320.1-5 U形 screw backing plate |
| 4100.2272.01 | K1320.1-6 U形 screw 锁紧 backing plate |
| 4100.2274.01 | K1320.1-8 切割环 |
| 4100.2280.01 | K1320.4-2 密封板 clamp plate |
| 4100.2304.01 | K1411.1-10 上圆板 |
| 4100.2323.01 | K1411.1-8 中间板 |
| 4100.2411.01 | K1414.00.02 支杆 |
| 4100.2424.01 | K1414.01.08 上圆盘 |
| 4100.2427.01 | K1414.01.11 中圆盘 |
| 4100.2437.01 | K1414.02.02 clamp plate |
| 4100.2438.01 | K1414.02.03 甩油圈 |
| 4100.2440.01 | K1414.02.05 shaft sleeve |
| 4100.2442.01 | K1414.02.07 shaft sleeve |
| 4100.2444.01 | K1414.02.09 油管 |
| 4100.2450.01 | K1414.04.02 管子 |
| 4100.2451.01 | K1414.04.04 clamp plate |
| 4100.2454.01 | K1414.04.07 防护圈 |
| 4100.2455.01 | K1414.04.08 管子 |
| 4100.2460.01 | K1414.05.04 圆环 |
| 4100.2468.01 | K1414.06.02 press ring |
| 4100.2469.01 | K1414.06.03 clamp plate |
| 4100.2471.01 | K1414.06.05 spring seat Ⅰ |
| 4100.2473.01 | K1414.06.07 spring seat Ⅱ |
| 4100.2516.01 | K1414.07.04 backing plate |
| 4100.2541.01 | K1416.01.02 圆环 |
| 4100.2573.01 | K1417.1.0.15 中圆板 |
| 4100.2577.01 | K1417.1.0.17 上圆板 |
| 4100.2584.01 | K1417.1.0.25 拖板 |
| 4100.2585.01 | K1417.1.0.26 管夹 |
| 4100.2602.01 | K1417.2.0.09 washer |
| 4100.2603.01 | K1417.2.0.11 上 press sleeve |
| 4100.2604.01 | K1417.2.0.12 下 press sleeve |
| 4100.2614.01 | K1417.4.0.02 挡油圈 |
| 4100.2625.01 | K1417.5.0.03 圆环 |
| 4100.2630.01 | K1417.5.0.06 steel plate |
| 4100.2639.01 | K1417.6.0.03 锁紧缸体 |
| 4100.2640.01 | K1417.6.0.04 柱塞 |
| 4100.2716.01 | K1420.1-12 中圆板 |
| 4100.2737.01 | K1420.1-6 上圆板 |
| 4100.2741.01 | K1420.1-9 调整片 |
| 4100.2743.01 | K1420.2-10 上 press sleeve |
| 4100.2744.01 | K1420.2-11 下 press sleeve |
| 4100.2750.01 | K1420.2-7 oil slinger |
| 4100.2751.01 | K1420.2-8 压垫 |
| 4100.2752.01 | K1420.2-9 压圈 |
| 4100.2762.01 | K1420.4-5 挡油圈 |
| 4100.2817.01 | K1420.7-6 backing plate |
| 4100.2882.01 | K1423.1-5 shim set |
| 4100.2884.01 | K1423.1-7 中圆板 |
| 4100.2900.01 | K1423.2-11 端 clamp plate |
| 4100.2901.01 | K1423.2-12 上 press ring |
| 4100.2903.01 | K1423.2-13 下 press ring |
| 4100.2905.01 | K1423.2-2 countershaft |
| 4100.2912.01 | K1423.2-9 clamp plate |
| 4100.2922.01 | K1423.4-5 spring sleeve |
| 4100.2982.01 | K1423.7-8 铁块 |
| 4100.3059.01 | K1435.3-5 止动板 |
| 4100.3067.01 | K1438.2.2-1 钢管 |
| 4100.3101.01 | K1438.6.7-5 管帽 |
| 4100.3136.01 | K1312.15.2-1 钢管锌φ80×4,L=585 |
| 4100.3137.01 | K1501.3.1-1 盖 |
| 4100.3507.01 | K1320.11.2-1 板 |
| 4100.3557.01 | K1320.2.1-7 堵头 |
| 4100.3578.01 | K1320.3-6 dust seal press ring |
| 4100.3590.01 | K1320.5-2 止推环 |
| 4100.3597.01 | K1320.5-9 countershaft |
| 4100.4003.01 | K5802.1.3.1-3 锤柄 |
| 4100.4067.01 | K5108.1.6-2 liner plate |
| 4100.4068.01 | K5108.1.7-1(左) left liner plate 一 |
| 4100.4069.01 | K5108.1.7-2(左) left liner plate 二 |
| 4100.4070.01 | K5108.1.7-3 liner plate 三 |
| 4100.4072.01 | K5108.1.7-5 liner plate 五 |
| 4100.4074.01 | K5108.1.7-7 liner plate 七 |
| 4100.4116.01 | K5803.1.3-3 hammer shaft |
| 4100.4132.01 | K5108.3-16 shaft-end plate |
| 4100.4174.01 | K5108.3-15 翻边 washer |
| 4100.4181.01 | K5802.1.2-8 steel plate |
| 4100.4211.01 | K5108.3-4 隔环(一) |
| 4100.4215.01 | K5803.1.3-4 护轴环 |
| 4100.4227.01 | K3524.3-9 卡环 |
| 4100.4228.01 | K5806II.3-19 卡环 |
| 4100.4238.01 | K5108.2.2-1 nut |
| 4100.4249.01 | K3524.3-3 blind cover |
| 4100.4256.01 | K5803.1-1 seal ring 板 |
| 4100.4274.01 | K5802.1.1-7 手柄 |
| 4100.4278.01 | K3524.3-4 锁盖 |
| 4100.4281.01 | K5803.1.3-10 锁盘 |
| 4100.4283.01 | K5806II.3-21 sleeve |
| 4100.4285.01 | K3524.3-11 through cover |
| 4100.4293.01 | K5108.1-3 pin |
| 4100.4295.01 | K5108.3.2-3 锤 pin |
| 4100.4296.01 | K5108.3-12 pin |
| 4100.4303.01 | K5803.1.3-2 pin 盘 |
| 4100.4309.01 | K5108.1.6-1 压紧 nut |
| 4100.4336.01 | K5108.3.2-4 stop washer |
| 4100.4351.01 | K5803.1.3-8 shaft sleeve |
| 4100.4352.01 | K5806II.3-16 shaft sleeve |
| 4100.4567.01 | H-41422100 bush (内侧) (关闭) |
| 4100.4568.01 | H-41422200 bush (外侧) |
| 4100.4602.01 | H-31417000 baffle plate |
| 4100.4605.01 | H-M31152001 baffle plate 40×60×80 |
| 4100.4639.01 | H-45HDIS-S103 垫 |
| 4100.4661.01 | H-47331000序1 shim I |
| 4100.4663.01 | H-47331000序2 shim II |
| 4100.4686.01 | H-41623000 locating block |
| 4100.4716.01 | H-31641202 wear block |
| 4100.4717.01 | H-41641202 wear block |
| 4100.4729.01 | H-31646205 wear block (右) |
| 4100.4730.01 | H-41646204 wear block (右) |
| 4100.4734.01 | H-31645205 wear block (左) |
| 4100.4735.01 | H-41645204 wear block (左) |
| 4100.4741.01 | H-M41336000 盖 |
| 4100.4840.01 | H-36HDIS-H110G end cover |
| 4100.4966.01 | H-31422100 内侧 bush |
| 4100.4998.01 | H-36AF-12280-00 eccentric sleeve 止退板 |
| 4100.5077.01 | H-M31422200 外侧 bush |
| 4100.5159.01 | H-41416000 clamp plate |
| 4100.5160.01 | H-41417000 clamp plate |
| 4100.5167.01 | H-36AF-AP-32 press sleeve |
| 4100.5195.01 | H-A21115001 cylindrical pin |
| 4100.5213.01 | H-M31462000 涨紧 sleeve seal ring |
| 4100.5244.01 | H-M31441000 轴板 |
| 4100.6415.01 | CR253.02.01-5 bush |
| 4100.6454.01 | PSJ-0310 锤 sleeve (一) |
| 4100.6483.01 | K3904.1.1-26 hammer shaft 垫环(I) |
| 4100.6484.01 | K3900.1-5 hammer shaft end cover |
| 4100.6485.01 | K3903.1-8 hammer shaft end cover |
| 4100.6486.01 | K3904.1.1-11 hammer shaft end cover |
| 4100.6487.01 | K3907.2-4 hammer shaft end cover |
| 4100.6511.01 | K3903.3-2 带环 nut |
| 4100.6525.01 | K3900.1-10 baffle plate |
| 4100.6526.01 | K3903.1-24 baffle plate |
| 4100.6527.01 | K3904.1.1-12 baffle plate |
| 4100.6529.01 | K3907.2-5(A) baffle plate |
| 4100.6551.01 | K3907.2.1-2(A) retainer ring |
| 4100.6553.01 | K3907.4-19 retainer ring |
| 4100.6556.01 | K3900.5-5 挡块 |
| 4100.6557.01 | K3903.8-9 挡块 |
| 4100.6564.01 | CR253.05.02-2 retaining ring |
| 4100.6566.01 | K1902.1-12 retaining ring |
| 4100.6567.01 | K3900.1-18 retaining ring |
| 4100.6568.01 | K3903.2-30 retaining ring |
| 4100.6570.01 | K3904.1.4.1-8 retaining ring |
| 4100.6571.01 | K3905.5-2 retaining ring |
| 4100.6572.01 | K3905.6.4-4 retaining ring |
| 4100.6582.01 | K3906.7-12 oil ring |
| 4100.6584.01 | K3906.7-5 oil slinger |
| 4100.6672.01 | K3903.8-6 垫块(二) |
| 4100.6673.01 | K3903.8-5 垫块(一) |
| 4100.6674.01 | CR253.05.01-9 shim |
| 4100.6675.01 | K3900.1-4 shim |
| 4100.6676.01 | K3903.1-19 shim |
| 4100.6696.01 | K1902.1-7 washer |
| 4100.6697.01 | K3903.3-19 washer |
| 4100.6698.01 | K3904.1.3-8 washer 60 |
| 4100.6699.01 | K3904.1.4-28 washer |
| 4100.6700.01 | K3904.1.5-5 washer |
| 4100.6701.01 | K3905.2-5 washer |
| 4100.6702.01 | K3905.6-42 washer |
| 4100.6703.01 | K3905A.3-8 washer |
| 4100.6704.01 | K3907.1-6 washer |
| 4100.6715.01 | K3904.3-6 washer 52 |
| 4100.6719.01 | K1902.3-7 washer 60 |
| 4100.6720.01 | K3905.4-6 washer 60 |
| 4100.6726.01 | K3905-4 垫铁 |
| 4100.6757.01 | K3900.1-A 顶环 |
| 4100.6785.01 | K3907.2-13 end cover |
| 4100.6800.01 | K3900.1-13 端 sleeve |
| 4100.6801.01 | K3903.1-9 端 sleeve |
| 4100.6812.01 | K3903.3-14 法兰 |
| 4100.6888.01 | K3900.2-4 lock washer |
| 4100.6889.01 | K3900.5-6 lock washer |
| 4100.6904.01 | K3900.3-3 lock washer (Ⅰ) |
| 4100.6905.01 | K3903.3-8 lock washer (Ⅰ) |
| 4100.6906.01 | K3900.2-7 lock washer (Ⅱ) |
| 4100.6907.01 | K3903.3-10 lock washer (Ⅱ) |
| 4100.6908.01 | K3900.3-7 lock washer (Ⅲ) |
| 4100.6909.01 | K3903.3-15 lock washer (Ⅲ) |
| 4100.6910.01 | K3903.3-5 lock washer (Ⅳ) |
| 4100.6911.01 | K3900.1-25 防松 washer |
| 4100.7721.01 | K3903.1.2-2 steel plate φ220×φ161×34 |
| 4100.7722.01 | K3903.1.4-2 steel plate φ220×φ161×34 |
| 4100.7723.01 | K3903.1.1-6 steel plate φ260×φ121 |
| 4100.7724.01 | K3903.1.3-6 steel plate φ260×φ121 |
| 4100.7799.01 | K3900.1-24 隔 sleeve |
| 4100.7949.01 | K3903.1-20 键(Ⅰ) |
| 4100.7951.01 | K3903.1-21 键(Ⅱ) |
| 4100.8050.01 | K3903.2-19 紧定 screw |
| 4100.8060.01 | K3903.2-14 紧定 bolt |
| 4100.8117.01 | K3903.8-11 连板 |
| 4100.8150.01 | K3903.2-22 screw M42 |
| 4100.8162.01 | K3903.1-25 螺杆M48 |
| 4100.8213.01 | K3903.7-11 bolt M24 |
| 4100.8222.01 | K3903.1-15 bolt M30×210 |
| 4100.8342.01 | PSJ-0108 seal ring |
| 4100.8343.01 | K3900.1-15 seal ring (Ⅰ) |
| 4100.8345.01 | K3900.1-21 seal ring (Ⅱ) |
| 4100.8387.01 | K3905A.4-1 内 gland |
| 4100.8444.01 | K3903-7 锲型条块 |
| 4100.8445.01 | K3903-8 锲型条块 |
| 4100.8453.01 | K3903.3-9 球面 washer |
| 4100.8523.01 | K3903.1-29 sleeve 管 |
| 4100.8604.01 | K3905A.4-2 外 gland |
| 4100.8724.01 | CR253.05-9 pin |
| 4100.8733.01 | K3900.4-3 pin |
| 4100.8735.01 | K3903.2-25 pin |
| 4100.8736.01 | K3903.3-18 pin |
| 4100.8737.01 | K3903.9-4 pin |
| 4100.8741.01 | K3905.4-12 pin |
| 4100.8743.01 | K3905.6-41 pin |
| 4100.8771.01 | K3903.2-8 pin φ50×130 |
| 4100.8826.01 | K3903.3-16 悬挂轴 |
| 4100.8827.01 | K3903.9-2 悬挂轴 |
| 4100.8833.01 | K3904.2-14 clamp plate |
| 4100.8848.01 | K3900.2-6 gland |
| 4100.8849.01 | K3903.3-3 gland |
| 4100.8863.01 | K3907.1.7-1 压杆 |
| 4100.8876.01 | K3903.2-35 press ring |
| 4100.8879.01 | K3905A.4.1-2 press ring |
| 4100.8880.01 | K3905A.4-17 press ring |
| 4100.8887.01 | K3903.2-34 压座 |
| 4100.8889.01 | K3905.6.4-8 压座 |
| 4100.8917.01 | K3905.6.5-2 油缸 pin |
| 4100.9017.01 | K3900.2.2-1 圆环 |
| 4100.9018.01 | K3900.2.3-1 圆环 |
| 4100.9031.01 | K3900.4.1-1 圆盘 |
| 4100.9054.01 | K3900-1 罩 |
| 4100.9128.01 | K3903.8-8 stop washer δ1.5 |
| 4100.9210.01 | K3906.4-2 shaft-end plate (1) |
| 4100.9214.01 | K3903.1-27 轴端挡头 |
| 4100.9215.01 | K3900.1-23 轴 end cover |
| 4100.9216.01 | K3903.7-9 shaft sleeve |
| 4100.9232.01 | K3900.7-11 shaft sleeve (Ⅱ) |
| 4100.9252.01 | K3903.1-14 main shaft end cover |
| 4100.9263.01 | K3900.1-9 taper sleeve |
| 4100.9716.01 | K4101.2-14us locating sleeve |
| 4100.9718.01 | K4101.2-15us sleeve |
| 4100.9719.01 | K4101.2-16us cover plate |
| 4100.9721.01 | K4101.2-19us 罩壳 |
| 4100.9722.01 | K4101.2-20Us shaft sleeve |
| 4100.9724.01 | K4101.2-3US clamp plate |
| 4100.9731.01 | K4101-6US end cover |
| 4100.9735.01 | K4103.3-18 gland |
| 4100.9737.01 | K4103.3-3 clamp plate |
| 4100.9744.01 | K4105.3.5-2 bush |
| 4100.9745.01 | K4105.3.5-3 堵盖 |
| 4100.9749.01 | K4105.3-2 locating sleeve |
| 4100.9750.01 | K4105.3-3 bearing cap |
| 4100.9752.01 | K4105.3-9 甩油板 |
| 4100.9756.01 | K4106US.1-11 管堵 |
| 4100.9758.01 | K4106us.1-3 bearing cap |
| 4100.9759.01 | K4106us.1-5 eccentric shaft (一) |
| 4100.9760.01 | K4106us.1-6 eccentric shaft (二) |
| 4100.9768.01 | K4109.1-4 backing plate (二) |
| 4100.9772.01 | K4109.3-1 locating sleeve |
| 4100.9780.01 | K4113.2-1 eccentric shaft (一) |
| 4100.9781.01 | K4113.2-2 eccentric shaft (二) |
| 4100.9784.01 | K4113.3-2 locating sleeve |
| 4100.9819.01 | K4114.2-7 bearing cap |
| 4100.9894.01 | KS4102.2-10 eccentric shaft (二) |
| 4100.9898.01 | KS4102.2-14 end cover |
| 4100.9900.01 | KS4102.2-16 cover plate |
| 4100.9903.01 | KS4102.2-3 clamp plate |
| 4100.9906.01 | KS4102.2-6 locating sleeve |
| 4100.9907.01 | KS4102.2-7 bearing cap |
| 4100.9910.01 | KS4102.2-9 eccentric shaft (一) |
| 4100.9916.01 | KS4106.1-5 下 clamp plate |
| 4100.9999.01 | K3131-32a序1 (K3131-47a序1) 圆柱 |
| 4200.0161.01 | K4205.4-4 pin (二) |
| 4200.1383.01 | K1203.1-16 大 base guard plate |
| 4200.1397.01 | K1202.1.08-02 底盖 |
| 4200.1398.01 | K1203.1.8-02 底盖 |
| 4200.1447.01 | K1202.3-04 分级机-上 gland |
| 4200.1449.01 | K1202.3-12 分级机-下 end cover |
| 4200.1450.01 | K1202.3-11 分级机-下 shaft sleeve |
| 4200.1457.01 | K1202.3-02 分级机- main shaft |
| 4200.1477.01 | K1202.1.08-9 辊轴 |
| 4200.1478.01 | K1203.1.8-09 辊轴 |
| 4200.1483.01 | K1202.1.08-07 辊 shaft sleeve |
| 4200.1544.01 | K1202.1.12-02 gear reducer - plug screw shim |
| 4200.1571.01 | K1203.1-7 coupling 挡盖 |
| 4200.1600.01 | K1202.1-3 磨圈 clamp plate |
| 4200.1601.01 | K1203.1-4 磨圈 clamp plate |
| 4200.1618.01 | K1202.1.08-04 上止推片 |
| 4200.1619.01 | K1203.1.8-04 上止推片 |
| 4200.1629.01 | K1203.1.12-14 铜 shim |
| 4200.1635.01 | K1204.1.4-02 plug screw shim |
| 4200.1644.01 | K1203.3-05 下 gland |
| 4200.1645.01 | K1202.1.08-03 下止推片 |
| 4200.1646.01 | K1203.1.8-03 下止推片 |
| 4200.1735.01 | K1202.1-23 中心轴架底盖 |
| 4200.1738.01 | K1203.3-04 shaft sleeve |
| 4200.1740.01 | K1203.3-02 轴 gland |
| 4200.1753.01 | K1202.1-7 柱销 retaining ring |
| 4200.1754.01 | K1203.1-9 柱销 retaining ring |
| 4200.1876.01 | K1204.1.3-1 主机 belt 张紧顶杆 |
| 4200.2021.01 | K5125.8-2 法兰 |
| 4200.2079.01 | K5125.3-13 retaining ring |
| 4200.2200.01 | K5125-2 end cover |
| 4200.2464.01 | K5188.3-4 clamp plate |
| 4200.2490.01 | K5125.3-10 右付偏心块 |
| 4200.2567.01 | K5147.4-2 止退垫 |
| 4200.2582.01 | K5125.3-9 bearing retaining ring |
| 4200.2593.01 | K5188.2.1-5 轴端 gland |
| 4200.2613.01 | K5125.3-2 左付偏心块 |
| 4200.2702.01 | K3107-15δ10 adjusting shim (二) |
| 4200.2727.01 | K31X04-47 顶头 |
| 4200.2735.01 | K31X06-18 顶头 |
| 4200.2742.01 | K1312.2.1-2 frame 筒体 |
| 4200.2743.01 | K1312.2.1-3 frame 衬 |
| 4200.2744.01 | K1312.2.1-6 起吊板 |
| 4200.2745.01 | K1312.2.1-7 筋板I |
| 4200.2746.01 | K1312.2.1-8 底板 |
| 4200.2752.01 | K1203.3-03 分级机轴 |
| 4200.2754.01 | K1203.3-08 上 gland |
| 4200.3009.01 | K3204-12 oil slinger |
| 4200.3012.01 | K3204-34 washer |
| 4200.3013.01 | K3204-36A washer |
| 4200.3017.01 | K3204-3 movable-jaw guard |
| 4200.3029.01 | K3204-46B 接轴(二) |
| 4200.3030.01 | K3204-45B 接轴(一) |
| 4200.3031.01 | K3204-18 adapter sleeve |
| 4200.3042.01 | K3204-P 配重块 |
| 4200.3046.01 | K3204-42 upper side liner |
| 4200.3051.01 | K3204-25A clamp plate |
| 4200.3062.01 | K3204-8 shaft-end ring |
| 4200.3064.01 | K3204-37A toggle seat |
| 4200.3065.01 | K3204-39A toggle seat |
| 4200.3218.01 | K3107-17 顶头 |
| 4200.3242.01 | K3320-5 连接板 |
| 4200.3263.01 | K3320-6 斜铁 |
| 4200.3273.01 | K3107-4A toggle seat (一) |
| 4200.3521.01 | K3131-7b movable-jaw guard |
| 4200.3629.01 | K3321.1-5 后墙外板 |
| 4200.3632.01 | K3321-15 后墙 wedge backing plate (短) |
| 4200.3636.01 | K3321-8 frame 连杆压紧块 |
| 4200.3640.01 | K3321-26 tie-rod spring end cover shim |
| 4200.3649.01 | K3321-40 前墙螺 sleeve |
| 4200.4009.01 | K4974.12-1 liner plate (1) |
| 4200.4010.01 | K4974.14-1 liner plate (1) |
| 4200.4011.01 | K4974.14-9 liner plate (10) |
| 4200.4012.01 | K4974.12-3 liner plate (2) |
| 4200.4014.01 | K4974.12-4 liner plate (3) |
| 4200.4015.01 | K4974.14-2 liner plate (3) |
| 4200.4016.01 | K4974.12-9 liner plate (4) |
| 4200.4017.01 | K4974.14-3 liner plate (4) |
| 4200.4019.01 | K4974.14-4 liner plate (5) |
| 4200.4021.01 | K4974.14-5 liner plate (6) |
| 4200.4023.01 | K4974.14-6 liner plate (7) |
| 4200.4024.01 | K4974.14-7 liner plate (8) |
| 4200.4025.01 | K4974.14-8 liner plate (9) |
| 4200.4029.01 | K4974.11-11 带轮 clamp plate |
| 4200.4030.01 | K4974.20-2 带轮 clamp plate |
| 4200.4056.01 | K4974.19-3 分配器 |
| 4200.4066.01 | K4974.23-1 搁架 |
| 4200.4077.01 | K4974.12-2 夹持杆 |
| 4200.4110.01 | K4974.11-6 内 shaft sleeve |
| 4200.4127.01 | K4974.11-7 外 shaft sleeve |
| 4200.4129.01 | K4974.11-9 下 bush |
| 4200.4174.01 | K4974.11-5 shaft sleeve |
| 4200.4180.01 | K4974-8 转子底板 |
| 4200.4201.01 | K4972.3-1 liner plate (1) |
| 4200.4203.01 | K4972.3-2 liner plate (3) |
| 4200.4204.01 | K4972.3-5 liner plate (4) |
| 4200.4205.01 | k4972.3-3 liner plate (5) |
| 4200.4206.01 | K4972.3-4 liner plate (6) |
| 4200.4207.01 | K4972.3-6 liner plate (7) |
| 4200.4208.01 | K4972.3-7 liner plate (8) |
| 4200.4209.01 | K4972.3-8 liner plate (9) |
| 4200.4268.01 | K4972.1-6 内 liner plate (1) |
| 4200.4269.01 | K4972.1-5 内 liner plate (2) |
| 4200.4270.01 | K4972.1-4 内 liner plate (3) |
| 4200.4271.01 | K4972.1-1 内 liner plate (4) |
| 4200.4291.01 | K4972.12.1 外刀 |
| 4200.4292.01 | K4972.2-7 外 shaft sleeve |
| 4200.4373.01 | K4976.6-3 带轮 clamp plate |
| 4200.4443.01 | K4976.4-6 内 shaft sleeve |
| 4200.4461.01 | K4976.4-8 下 bush |
| 4200.4500.01 | K4976.4-5 shaft sleeve |
| 4200.4571.01 | K1312.2.1-10 顶杆导向座 (关闭) |
| 4200.4983.01 | K1601.04-14 涨紧 sleeve press ring |
| 4200.5003.01 | K1601.06.02 liner plate |
| 4200.5103.01 | K1328.1-10 切割环 |
| 4200.5430.01 | K1312.15.2-1 钢管锌φ80×4,L=620 |
| 4200.5463.01 | K31X08-11 movable-jaw guard |
| 4200.5484.01 | K31X08-34 三角板 |
| 4200.5486.01 | K31X08-29 sleeve |
| 4200.5497.01 | K31X08-22 shaft-end ring |
| 4200.5499.01 | K31X08-2 toggle seat |
| 4200.5500.01 | K31X08-36 toggle seat |
| 4200.5600.01 | K31X10-13δ15 adjusting shim |
| 4200.5958.01 | K3105HA.1-3A frame 内密封盖 |
| 4200.5960.01 | K3105HA.1-5A frame 外 seal ring 环( sheave 端) |
| 4200.5961.01 | K3105HA.1-6A frame 外密封盖 |
| 4200.5964.01 | K3105HA.1-9 frame 外 seal ring 环( flywheel 端) |
| 4200.5965.01 | K3105.2.1a序2 挡块35×40×20 |
| 4200.5971.01 | K3105.4-4A shim set |
| 4200.6051.01 | K31X04-4a toggle seat |
| 4200.6177.01 | K4961.08-2 盖 |
| 4200.6179.01 | K4961.08-4a locating sleeve |
| 4200.6180.01 | K4961.08-5 传感器座 |
| 4200.6182.01 | K4961.08-7 环I |
| 4200.6183.01 | K4961.08-8 环II |
| 4200.6187.01 | K4961.08-12 顶盖 |
| 4200.6316.01 | K3321-34a tie-rod spring guard plate |
| 4200.6326.01 | K3321.1-8 后墙 baffle plate |
| 4200.6404.01 | K3105.4-6δ10 adjusting shim |
| 4200.6516.01 | K1312.15.2序3 钢管锌φ40×3.5,L=865 |
| 4200.6517.01 | K1312.15.2序11 钢管锌φ40×3.5,L=305 |
| 4200.6518.01 | K1312.15.2序16 钢管锌φ15×2.75,L=220 |
| 4200.6519.01 | K1312.15.2序19 钢管锌φ40×3.5,L=500 |
| 4200.6520.01 | K1312.15.2序24 钢管锌φ40×3.5,L=200 |
| 4200.6521.01 | K1312.2.1序2 钢管光φ40×3.5,L=25 |
| 4200.6601.01 | K3103-5 toggle seat |
| 4200.6602.01 | K3103-9 toggle seat |
| 4200.6655.01 | K3204-7A(一)δ10 adjusting shim (一) |
| 4200.6656.01 | K3204-7A(二)δ10 adjusting shim (二) |
| 4200.6657.01 | K3204-7A(二)δ15 adjusting shim (二) |
| 4200.6658.01 | K3204-7A(一)δ20 adjusting shim (一) |
| 4200.6659.01 | K3204-7A(二)δ20 adjusting shim (二) |
| 4200.6673.01 | D560S045-6A 动密封盖 |
| 4200.6736.01 | K3126C-12δ15 adjusting shim (一) |
| 4200.6737.01 | K3126C-12δ20 adjusting shim (一) |
| 4200.6739.01 | K3126C-13δ15 adjusting shim (二) |
| 4200.6740.01 | K3126C-13δ20 adjusting shim (二) |
| 4200.6851.01 | K3906.4-9-2(A) bush |
| 4200.6901.01 | K3125-32 shaft-end ring |
| 4200.6946.01 | K3602.02-1(右) liner plate (右) |
| 4200.6991.01 | K3601H.00-29 cover plate |
| 4200.7031.01 | K3322-20 movable jaw toggle plate 座 |
| 4200.7035.01 | K3322.2-9 固定 end cover |
| 4200.7040.01 | K3322-18 后墙 toggle plate 座 |
| 4200.7042.01 | K3322-31 frame 连杆 shim |
| 4200.7043.01 | K3322-8 frame 连杆压紧块 |
| 4200.7052.01 | K3322-34 tie-rod spring guard plate |
| 4200.7106.01 | K3605BS.4-1 liner plate |
| 4200.7107.01 | K3603BS.4A-4 liner plate |
| 4200.7108.01 | K3605BS.4A-1 liner plate |
| 4200.7109.01 | K3605BS.4A-2 liner plate |
| 4200.7110.01 | K3605BS.4A-3 liner plate |
| 4200.7111.01 | K3605BS.4-10 liner plate |
| 4200.7112.01 | K3605BS.4-11 liner plate |
| 4200.7113.01 | K3605BS.4-12 liner plate |
| 4200.7114.01 | K3601BS.4-1 liner plate |
| 4200.7115.01 | K3601BS.4-2 liner plate |
| 4200.7116.01 | K3601BS.4A-1 liner plate |
| 4200.7117.01 | K3601BS.4A-2 liner plate |
| 4200.7183.01 | K1417.02.03(25) 法兰盘25 |
| 4200.7427.01 | HD26-01-0102 门顶杆 |
| 4200.7428.01 | HD26-01-0103 liner plate |
| 4200.7434.01 | HD26-0103 压圈 |
| 4200.7439.01 | HD26-0126 liner plate |
| 4200.7440.01 | HD26-0127 liner plate |
| 4200.7441.01 | HD26-0128 liner plate |
| 4200.7442.01 | HD26-0129 liner plate |
| 4200.7447.01 | HD26-0147 liner plate |
| 4200.7448.01 | HD26-0148 liner plate |
| 4200.7449.01 | HD26-0149 liner plate |
| 4200.7460.01 | HD31-0002 销 (一) |
| 4200.7480.01 | HD31-0204A through cover (三) |
| 4200.7521.01 | HD31A-0105-1 clamp plate |
| 4200.7522.01 | HD31A-0105-2 pressing block |
| 4200.7523.01 | HD31A-0105-3 steel plate |
| 4200.7556.01 | K31X01-35 tie rod |
| 4200.7558.01 | K31X01-37 toggle seat |
| 4200.7560.01 | K31X01-39 toggle seat |
| 4200.7584.01 | K3707.1.-6 baffle plate |
| 4200.7594.01 | K4202.1-2 retainer ring |
| 4200.7595.01 | K4202.1-3 retaining ring |
| 4200.7597.01 | K4202.2-7 shim |
| 4200.7611.01 | K4202.4-1 retaining ring |
| 4200.7612.01 | K4202.4-2 retainer ring |
| 4200.7621.01 | K4202.5.2-2 隔环 |
| 4200.7624.01 | K4202.5.2-5 sleeve |
| 4200.7625.01 | K4202.5.2-6 轮轴 |
| 4200.7638.01 | K4204.2-2 clamp plate |
| 4200.7640.01 | K4204.2-4 丝杆 |
| 4200.7643.01 | K4204.2-8 retaining ring |
| 4200.7648.01 | K4204.3.2-2 轴 |
| 4200.7654.01 | K4204.3.2-5 retaining ring |
| 4200.7656.01 | K4204.3.2-7 sleeve |
| 4200.7668.01 | K4204.3-9 backing plate |
| 4200.7675.01 | K4204.5.2-3 滚柱 |
| 4200.7680.01 | K4204.5-3 washer |
| 4200.7682.01 | K4204.5-4 retainer ring |
| 4200.7683.01 | K4204.5-5 retaining ring |
| 4200.7694.01 | K4205.2.1-2 隔环 |
| 4200.7701.01 | K4205.3.1-1 backing plate |
| 4200.7702.01 | K4205.3.1-2 轴 |
| 4200.7707.01 | K4205.3.1-5 retaining ring |
| 4200.7709.01 | K4205.3.1-7 sleeve |
| 4200.7757.01 | K4216.5-3 retaining ring |
| 4200.7760.01 | K4216.7.1-5 angle steel |
| 4200.7907.01 | K4601.3-11 连接杆 |
| 4200.7908.01 | K4601.3-12 挡 sleeve (一)φ45×4 |
| 4200.7909.01 | K4601.3-13 挡 sleeve (二)φ45×4 |
| 4200.7910.01 | K4601.3-14 定距 sleeve (一)φ45×4 |
| 4200.7911.01 | K4601.3-15 固定杆 |
| 4200.7912.01 | K4601.3-16 定距 sleeve (二)φ60×4 |
| 4200.7913.01 | K4601.3-17 sleeve φ60×4 |
| 4200.7914.01 | K4601.3-18 联接轴φ50×885 |
| 4200.7915.01 | K4601.3-19 sleeve φ35×125 |
| 4200.7924.01 | K4601.4-10 shim |
| 4200.7927.01 | K4601.4-4 pin |
| 4200.7935.01 | K4601-1 guard plate Iδ=20 |
| 4200.7938.01 | K4601-5 guard plate IVδ=20 |
| 4200.7939.01 | K4601-6 pressing block δ=16 |
| 4200.7946.01 | K4601A.4-13 轴端 washer |
| 4200.7949.01 | K4605.4-14 backing plate |
| 4200.7998.01 | K5115.1-6 压紧板 |
| 4200.8014.01 | K5115.4-3 半联轴节I |
| 4200.8026.01 | K5130.04-01 扇形块 |
| 4200.8027.01 | K5130.04-02 轴端 gland |
| 4200.8061.01 | K5131-1 shim |
| 4200.8118.01 | K5143.1.12 涨紧板 |
| 4200.8127.01 | K5160.04-01 转轴 |
| 4200.8128.01 | K5160.04-02 光杆 |
| 4200.8173.01 | K6001.2-4 baffle plate |
| 4200.8324.01 | NCP19.2-4 sleeve |
| 4200.8325.01 | NCP19.2-5 止推环 |
| 4200.8449.01 | NCP23.2.2-11 保护 sleeve |
| 4200.8454.01 | NCP23.2.2-16 挡块 |
| 4200.8492.01 | NCW22.3.3-3 浪柱 |
| 4200.8505.01 | NCW22.4.2-2 隔环 |
| 4200.8513.01 | NCW9408.2-3 washer |
| 4200.8860.01 | 序20 steel plate 20×175×180 |
| 4200.8862.01 | K3321-36 tie-rod spring gland |
| 4200.8908.01 | K5139.3-15 槽形垫 |
| 4200.8981.01 | K5139.3-14 放油塞 |
| 4200.9071.01 | K5139.3-12 通气孔帽 |
| 4200.9072.01 | K5139.3-11 通气孔塞 |
| 4200.9093.01 | K5139.3-13 油位检查棒 |
| 4200.9213.01 | K3321-25a tie-rod spring end cover |
| 4200.9254.01 | K5108.3.2.1.00(G) 锤柄 |
| 4200.9339.01 | DG11楔 |
| 4200.9380.01 | DG11调整 gear ring |
| 4200.9387.01 | DG11 idler roller |
| 4200.9399.01 | DG11固定板 |
| 4200.9412.01 | DG11 bowl bearing frame shim set |
| 4200.9414.01 | DG11 frame 销 |
| 4200.9438.01 | DG11箍筋 |
| 4200.9439.01 | DG11接头体15 |
| 4200.9468.01 | DG11上 pin |
| 4200.9470.01 | DG11下 pin |
| 4200.9486.01 | DG11多路接头 |
| 4200.9547.01 | K3322.0A序39 调整装置防灰 sleeve φ140 L=235 |
| 4200.9741.01 | K3324.1-5 后墙外板 |
| 4200.9771.01 | K3324-14 后墙 backing plate (长) |
| 4200.9772.01 | K3324-15 后墙 backing plate (短) |
| 4200.9775.01 | K3324-18 后墙 toggle plate 座 |
| 4200.9777.01 | K33324-20 movable jaw toggle plate 座 |
| 4200.9783.01 | K3324-25 tie-rod spring end cover |
| 4200.9791.01 | K3324-34 tie-rod spring guard plate |
| 4200.9796.01 | K3324-41 tie-rod spring gland |
| 4300.5074.01 | K3639.1-5A 楔紧块 |
| 4300.5509.01 | K3322.2-21 shim |
| 4300.5511.01 | K3322.2.23 clamp plate |
| 4300.5512.01 | K3321-20(修) movable jaw toggle plate 座 |
| 4300.5589.01 | K31X02-17δ20 adjusting shim δ20 |
| 4300.5710.01 | K1180-02 toggle plate |
| 4300.5816.01 | K4010.2-6 圆盘 |
| 4300.5937.01 | K3321.23-5 tie-rod spring 座 backing plate |
| 4300.6232.01 | K3322-18a 后墙 toggle plate 座 |
| 4300.6233.01 | K3322-20c movable jaw toggle plate 座 |
| 4300.6523.01 | K6602.1.3.1-4 shaft sleeve (一) |
| 4300.6919.01 | K3324-20a movable jaw toggle plate 座 |
| 4400.1328.01 | K3603.04-17 wear block |
| 4400.1505.01 | K3126C-40A lower side liner |
| 4500.0024.01 | K3105A.GJ-2 round nut 扳手 |
| 4500.0025.01 | K3105A.GJ-3 round nut 扳手 |
| 8100.4258.01 | GB3091 镀锌钢管DN40×3.5-175 |
| 8100.4259.01 | GB3091 镀锌钢管DN40×3.5-690 |
| 8100.4260.01 | GB3091 镀锌钢管DN80×4-150 |
| 8100.4261.01 | GB3091 镀锌钢管DN80×4-574 |
| 8100.4262.01 | GB3091 镀锌钢管DN40×3.5-227 |
| 8100.4266.01 | GB3091 镀锌钢管DN15×2.8-220 |
Send your part-number list and delivery address; we will check stock and drawings and reply within 24 hours with unit price, lead time and export documentation.