Covers sheave, frame, main shaft and 945 genuine part numbers. Search by part number or description; we verify against drawings before shipping.
Type a part number or description to filter. If a part is not listed, contact us and we will check it against the catalogue.
| Part No. | Description |
|---|---|
| 2100.0001.01 | K3105.1 frame 部件 |
| 2100.0002.01 | K3105.2A movable jaw 部件 |
| 2100.0139.01 | K1423.12 feeding device assembly |
| 2100.0174.01 | lubrication system (电) |
| 2200.0083.01 | tools and accessories |
| 2200.0222.01 | tools and accessories |
| 3100.0003.01 | K3105.2-17(组件) flywheel assembly |
| 3100.0004.01 | K3105.2-20(组件) sheave assembly |
| 3100.0005.01 | K3105.4 adjusting assembly |
| 3100.0008.01 | K3105.9.0B lubrication system |
| 3100.0019.01 | K3206-29(组件) flywheel assembly |
| 3100.0020.01 | K3206-43(组件) sheave assembly |
| 3100.0037.01 | K3603.05 slide rail 部件 |
| 3100.0060.01 | K3611.1(S) 均整部件 |
| 3100.0074.01 | K3602BS.2 转子部件 |
| 3100.0077.01 | K3611.4Z 转子部件 |
| 3100.0078.01 | K3131.1a frame |
| 3100.0079.01 | K3131.4a toggle plate |
| 3100.0081.01 | K3135.4 toggle plate |
| 3100.0151.01 | K5108.2.2 拉紧装置 |
| 3100.0511.01 | K3904.1.5.0 保险门 |
| 3100.0513.01 | K3905.2.0 保险门 |
| 3100.0519.01 | K3904.1.3.0 篦子 |
| 3100.0521.01 | K3905.4.0 篦子 |
| 3100.0522.01 | K1901.3B.1(55mm) 篦子架 |
| 3100.0523.01 | K1902.3B.1(mm) 篦子架 |
| 3100.0524.01 | K3905.4.1.0 篦子架 |
| 3100.0525.01 | K3713.06.01 篦子托车 |
| 3100.0534.01 | K3713-06-04 抽轴装置 |
| 3100.0547.01 | K3904.3.0 hammer shaft 抽出装置 |
| 3100.0548.01 | K3907.6 hammer shaft 抽出装置 |
| 3100.0549.01 | K3905A.5.0 从动给料辊 |
| 3100.0563.01 | K3905.5.1.0 lifting ring nut |
| 3100.0567.01 | K3900.8.0 adjusting screw |
| 3100.0568.01 | K3900.1.1.0 端盘 |
| 3100.0569.01 | K3900.2.0 impact plate |
| 3100.0619.01 | K3900.5.0 排料篦子 |
| 3100.0628.01 | K3900.3.0 breaker plate |
| 3100.0629.01 | K3904.1.2.0 breaker plate |
| 3100.0630.01 | K3905.5.0 breaker plate |
| 3100.0637.01 | K3904.5.0 取篦架小车 |
| 3100.0638.01 | K3905.9 取篦架小车 |
| 3100.0653.01 | K3905.5.2.0 rubber spring (Ⅰ) |
| 3100.0655.01 | K3905.5.3.0 rubber spring (Ⅱ) |
| 3100.0672.01 | K3905A.4.0 主动给料辊 |
| 3100.0676.01 | K3900.1.0 转子 |
| 3100.0677.01 | K3903A.1.0 转子 |
| 3100.0678.01 | K3904.1.1.0 转子 |
| 3100.0801.01 | C52547 支承架 |
| 3100.0807.01 | K4109.2 振动器 |
| 3100.0810.01 | K4113.2 振动器 |
| 3100.0819.01 | KS4102.2 (A) 振动器 |
| 3100.1403.01 | K1202.1.08 4R磨辊总成 |
| 3100.1408.02 | K1203A.1.8 5R磨辊总成 |
| 3100.1601.01 | K9401.00 振动器 |
| 3100.1639.01 | K5125.2 万向轴罩 |
| 3100.1640.01 | K5175.6 轮胎式联轴节 |
| 3100.1641.01 | K5125.4 轮胎式联轴节 |
| 3100.1656.01 | K5126.1 筛箱 |
| 3100.1660.01 | K5175.2 筛箱 |
| 3100.1676.01 | K5130.9 限位装置 |
| 3100.1678.01 | K5125.5 rubber 板万向轴 |
| 3100.1679.01 | K5175.2.7A rubber 条支承 |
| 3100.1681.01 | K5125.8 右 vibrator |
| 3100.1682.01 | K5147.3 振动器组件 |
| 3100.1683.01 | K5148.4 振动器 |
| 3100.1692.01 | K5192.2 振动器 |
| 3100.1710.01 | K5125.3 左 vibrator |
| 3100.1806.01 | K4972.2 轴系装配 |
| 3100.2508.01 | K4961.06a 转子组装 |
| 3100.2518.01 | K3105HA.1A frame 部件 |
| 3100.2519.01 | K3105HA.2A 动顎部件 |
| 3100.2520.01 | K3321.1a frame |
| 3100.2521.01 | K3321.2b movable jaw 部件 |
| 3100.2583.01 | HD31-02 转子 |
| 3100.2593.01 | K4202.1.2 sprocket |
| 3100.2596.01 | K4202.5.1 sleeve 滚子链 |
| 3100.2597.01 | K4202.5.2 滚轮 |
| 3100.2601.01 | K4204.3.2 idler roller |
| 3100.2622.01 | K4214.5.1 头部 sprocket |
| 3100.2641.01 | K4952.1 轴系装配 |
| 3100.2662.01 | LY9312.5.2.0 承料板 |
| 3100.2691.01 | NCW22.4.1 sleeve 滚子链 |
| 3100.2692.01 | NCW22.4.2 滚轮部分 |
| 3100.2740.01 | K5142.5 振动器 |
| 3100.2808.01 | K5130.04 vibrator |
| 3100.2831.01 | lubrication system (电) |
| 3100.2860.01 | K3322.2A movable jaw 部件 |
| 3100.2874.01 | K4312.4A 下 idler roller |
| 3100.2944.01 | S00000540.1 shim |
| 3500.0001.01 | 起顶机工具 |
| 3500.0002.01 | main-machine foundation bolt |
| 3500.0003.01 | motor slide rail + sheave |
| 3500.0004.01 | motor foundation bolt |
| 3500.0006.01 | 起顶机工具 |
| 3500.0007.01 | main-machine foundation bolt |
| 3500.0008.01 | motor slide rail + sheave |
| 3500.0010.01 | motor foundation bolt |
| 3500.0012.01 | motor slide rail + sheave |
| 3500.0013.01 | motor foundation bolt |
| 3500.0015.01 | motor slide rail + sheave |
| 3500.0016.01 | 起顶机工具 |
| 3500.0017.01 | main-machine foundation bolt |
| 3500.0018.01 | motor slide rail ＋ sheave (IP44/IP54) |
| 3500.0019.01 | motor foundation bolt |
| 3500.0026.01 | main-machine foundation bolt |
| 3500.0027.01 | motor slide rail + sheave |
| 3500.0028.01 | motor foundation bolt |
| 3500.0029.01 | 起顶机工具 |
| 3500.0030.01 | main-machine foundation bolt |
| 3500.0031.01 | motor slide rail + sheave |
| 3500.0032.01 | motor foundation bolt |
| 3500.0033.01 | 起顶机工具 |
| 3500.0034.01 | main-machine foundation bolt |
| 3500.0035.01 | motor slide rail + sheave |
| 3500.0036.01 | motor foundation bolt |
| 3500.0038.01 | main-machine foundation bolt |
| 3500.0039.01 | motor slide rail + sheave |
| 3500.0040.01 | motor foundation bolt |
| 3500.0041.01 | 起顶机工具 |
| 3500.0042.01 | main-machine foundation bolt |
| 3500.0043.01 | motor slide rail + sheave |
| 3500.0044.01 | motor foundation bolt |
| 3500.0045.01 | 起顶机工具 |
| 3500.0046.01 | main-machine foundation bolt |
| 3500.0047.01 | motor slide rail + sheave |
| 3500.0048.01 | motor foundation bolt |
| 3500.0049.01 | 起顶机工具 |
| 3500.0050.01 | main-machine foundation bolt |
| 3500.0051.01 | motor slide rail + sheave |
| 3500.0052.01 | motor foundation bolt |
| 3500.0053.01 | 起顶机工具 |
| 3500.0054.01 | main-machine foundation bolt |
| 3500.0055.01 | motor slide rail ＋ sheave (IP44/IP54) |
| 3500.0056.01 | motor foundation bolt |
| 3500.0057.01 | motor slide rail + sheave |
| 3500.0058.01 | motor foundation bolt |
| 3500.0059.01 | 起顶机工具 |
| 3500.0060.01 | main-machine foundation bolt |
| 3500.0065.01 | main-machine foundation bolt 组件 |
| 3500.0066.01 | motor foundation bolt 组件 |
| 3500.0067.01 | 起顶机工具 |
| 3500.0068.01 | main-machine foundation bolt |
| 3500.0069.01 | motor slide rail + sheave |
| 3500.0070.01 | motor foundation bolt |
| 3500.0071.01 | 起顶机工具 |
| 3500.0072.01 | main-machine foundation bolt |
| 3500.0073.01 | motor foundation bolt |
| 3500.0074.01 | 起顶机工具 |
| 3500.0075.01 | main-machine foundation bolt |
| 3500.0076.01 | motor foundation bolt |
| 3500.0077.01 | motor slide rail + sheave |
| 3500.0078.01 | main-machine foundation bolt 组件 |
| 3500.0080.01 | 起顶机工具 |
| 3500.0081.01 | main-machine foundation bolt |
| 3500.0082.01 | motor slide rail + sheave |
| 3500.0083.01 | motor foundation bolt |
| 3500.0085.01 | 起顶机工具 |
| 3500.0086.01 | main-machine foundation bolt |
| 3500.0088.01 | main-machine foundation bolt 组件 |
| 3500.0089.01 | motor 机 foundation bolt 组件 |
| 3500.0090.01 | slide rail 部件 |
| 3500.0091.01 | main-machine foundation bolt 组件 |
| 3500.0092.01 | motor foundation bolt 组件 |
| 3500.0093.01 | slide rail 部件 |
| 3500.0094.01 | main-machine foundation bolt 组件 |
| 3500.0095.01 | motor foundation bolt 组件 |
| 3500.0096.01 | main-machine foundation bolt 组件 |
| 3500.0097.01 | motor foundation bolt 组件 |
| 3500.0098.01 | K3601H.09 slide rail 部件 |
| 3500.0099.01 | motor foundation bolt |
| 3500.0100.01 | main-machine foundation bolt 组 |
| 3500.0102.01 | main-machine foundation bolt |
| 3500.0103.01 | 起顶机工具 |
| 3500.0104.01 | main-machine foundation bolt |
| 3500.0105.01 | motor slide rail + sheave |
| 3500.0106.01 | motor foundation bolt |
| 3500.0112.01 | 起顶机工具 |
| 3500.0113.01 | main-machine foundation bolt |
| 3500.0114.01 | motor slide rail + sheave |
| 3500.0115.01 | motor foundation bolt |
| 3500.0117.01 | main-machine foundation bolt |
| 3500.0118.01 | motor slide rail + sheave |
| 3500.0119.01 | motor foundation bolt |
| 3500.0121.01 | main-machine foundation bolt |
| 3900.1023.01 | 碗形 bearing 部 |
| 3900.1026.01 | adjusting sleeve assembly |
| 3900.1035.01 | adjusting sleeve assembly |
| 3900.1040.01 | eccentric sleeve assembly |
| 3900.1041.01 | 碗形 bearing 部 |
| 3900.1042.01 | K1416.01.00 crushing cone assembly |
| 3900.1043.01 | 支承 sleeve 部 |
| 3900.1044.01 | adjusting sleeve assembly |
| 3900.1051.01 | crushing cone assembly |
| 3900.1068.01 | 碗形 bearing 部 |
| 3900.1069.01 | K1434.1.0 crushing cone assembly |
| 3900.1075.01 | 传动部 |
| 3900.1076.01 | eccentric sleeve assembly |
| 3900.1077.01 | 碗形 bearing 部 |
| 3900.1089.01 | K1418.1.0.00 adjusting sleeve assembly |
| 3900.1096.01 | K1419.1.0.00 crushing cone assembly |
| 3900.1105.01 | crushing cone assembly |
| 3900.1130.01 | eccentric sleeve assembly |
| 3900.1143.01 | K1421.1.0 adjusting sleeve assembly |
| 3900.1147.01 | 传动部 |
| 3900.1150.01 | K1422.1.0 crushing cone assembly |
| 3900.1152.01 | adjusting sleeve assembly |
| 3900.1179.01 | adjusting sleeve assembly |
| 3900.1183.01 | 传动部 |
| 3900.1186.01 | K1423.5 crushing cone assembly |
| 3900.1192.01 | 传动部 |
| 3900.1195.01 | K1424.1 crushing cone assembly |
| 3900.1197.01 | K1424.2 adjusting sleeve assembly |
| 3900.1204.01 | crushing cone assembly |
| 3900.1240.01 | crushing cone assembly |
| 3900.1242.01 | adjusting sleeve assembly |
| 3900.1249.01 | crushing cone assembly |
| 3900.1255.01 | countershaft 部 |
| 3900.1258.01 | crushing cone assembly |
| 3900.1473.01 | crushing cone assembly |
| 3900.1477.01 | 均给装置部 |
| 3900.1483.01 | crushing cone assembly |
| 3900.1486.01 | 上部 frame 部 |
| 3900.1561.01 | 支承 sleeve 部 |
| 3900.1579.01 | crushing cone assembly |
| 4100.0010.01 | K3101-14 movable jaw |
| 4100.0011.01 | K3101-15B eccentric shaft |
| 4100.0049.01 | K3103-18 movable jaw |
| 4100.0051.01 | K3103-20 eccentric shaft |
| 4100.0083.01 | K3105.1.1 固定颚 wedge |
| 4100.0092.01 | K3105.1.4A 侧墙板( flywheel 端) |
| 4100.0093.01 | K3105.1.5A 侧墙板( sheave 端) |
| 4100.0094.01 | K3105.1.6 后墙 |
| 4100.0096.01 | K3105.1.7 前墙 wedge |
| 4100.0099.01 | K3105.1-10 side liner screw |
| 4100.0136.01 | K3105.2.1a wedge (关闭) |
| 4100.0137.01 | K3105.2.2 movable jaw |
| 4100.0139.01 | K3105.2.3 wedge |
| 4100.0142.01 | K3105.2-11A eccentric shaft |
| 4100.0149.01 | K3105.2-17D flywheel |
| 4100.0153.01 | K3105.2-20D sheave |
| 4100.0154.01 | K3105.2-22 挡灰板δ4×1170×250 |
| 4100.0157.01 | K3105.2-28A round nut |
| 4100.0160.01 | K3105.2-29A round nut (左) |
| 4100.0171.01 | paper gasket φ765×φ650 |
| 4100.0188.01 | K3105.5-1 tie rod |
| 4100.0197.01 | K3105-1 toggle plate |
| 4100.0202.01 | K3107.1B frame |
| 4100.0257.01 | K3124-21C eccentric shaft |
| 4100.0259.01 | K3124-23 movable jaw |
| 4100.0260.01 | K3124-25 挡灰板δ3×380×125 |
| 4100.0327.01 | K3126H.1A frame |
| 4100.0334.01 | K3126H-19 flywheel |
| 4100.0341.01 | K3126H-2改 eccentric shaft |
| 4100.0343.01 | K3126H-4 sheave |
| 4100.0348.01 | K3126R-8 movable jaw |
| 4100.0375.01 | K3206-29a flywheel |
| 4100.0380.01 | K3206-43a sheave |
| 4100.0391.01 | K3206-9H tie rod |
| 4100.0461.01 | K31X02-31 sheave |
| 4100.0462.01 | K31X04-31C sheave |
| 4100.0463.01 | K31X06-32 sheave |
| 4100.0464.01 | K31X10-31ZT sheave |
| 4100.0768.01 | K3603.6-2A spring seat |
| 4100.0799.01 | K31X04-6 挡灰板δ3×880×165 |
| 4100.0823.01 | K3602BS.3.1 base |
| 4100.0828.01 | K3611.5.7 base |
| 4100.0863.01 | K31X04.2.00 electric motor slide rail |
| 4100.0972.01 | K31X02-14 movable jaw |
| 4100.0973.01 | K31X04-9 movable jaw |
| 4100.0974.01 | K31X06-9 movable jaw |
| 4100.0975.01 | K31X10-5 movable jaw |
| 4100.1020.01 | K3637.4-2 impact plate 体 |
| 4100.1021.01 | K3639.3-2 impact plate 体 |
| 4100.1022.01 | K3639.4-2 impact plate 体 |
| 4100.1024.01 | K3602.03.05A 反击架 |
| 4100.1025.01 | K3603.03.05A 反击架 |
| 4100.1058.01 | K31X02-15 flywheel |
| 4100.1059.01 | K31X04-16C flywheel |
| 4100.1060.01 | K31X06-16 flywheel |
| 4100.1061.01 | K31X10-17ZT flywheel |
| 4100.1148.01 | K3637.2-14 观察门(二) |
| 4100.1152.01 | K3637.2-10 观察门(一) |
| 4100.1157.01 | K3603.03.12A 后反击架 |
| 4100.1165.01 | K3611.5.6 后门 |
| 4100.1166.01 | K3602BS.3.3 后上盖 |
| 4100.1206.01 | K31X02-1A frame |
| 4100.1207.01 | K31×02HG.1 frame |
| 4100.1209.01 | K31X04-1A frame |
| 4100.1210.01 | K31X06.1ZG frame |
| 4100.1211.01 | K31X06.HG.1A frame |
| 4100.1226.01 | K31X04-34 adapter sleeve |
| 4100.1237.01 | K3602jz-1 grinding plate 体 |
| 4100.1247.01 | K3605AX.6-10 tie rod |
| 4100.1298.01 | K3605AG.03-3A bolt M24×2 |
| 4100.1332.01 | K3602.03.02 门 |
| 4100.1337.01 | K3603BS.3.4 门 |
| 4100.1351.01 | K3602.03.03 门扣 |
| 4100.1420.01 | K3611.4Z-3 pulley |
| 4100.1421.01 | K3618.4-12 pulley |
| 4100.1426.01 | K31X02-16 eccentric shaft |
| 4100.1427.01 | K31X04-15 eccentric shaft |
| 4100.1428.01 | K31X06-15 eccentric shaft |
| 4100.1429.01 | K31X10-21( expansion sleeve ) eccentric shaft |
| 4100.1453.01 | K3637.2-3 上 shell (二) |
| 4100.1457.01 | K3637.2-2 上 shell (一) |
| 4100.1527.01 | K3637.2-1 下 shell |
| 4100.1547.01 | K3602.02-12 销 |
| 4100.1617.01 | K3602.03.07 pressing block |
| 4100.1650.01 | K3637.5-2 bracket |
| 4100.1651.01 | K3639.5-1 bracket |
| 4100.1669.01 | K3602BS.3.2 中箱体 |
| 4100.1748.01 | K3611.4.1C 转子架 |
| 4100.1769.01 | K31X06-28A 右 bearing cap |
| 4100.1789.01 | K31X06-20A 左 bearing cap |
| 4100.1791.01 | K3101-23 bearing cap |
| 4100.1792.01 | K3101-29 bearing cap |
| 4100.1798.01 | K3126H-3 (左) 左 bearing cap |
| 4100.1813.01 | K3131.3b movable jaw |
| 4100.1822.01 | K3131-14a adjusting seat |
| 4100.1829.01 | K3131-21a retainer ring |
| 4100.1830.01 | K3131-22a movable jaw seal ring |
| 4100.1831.01 | K3131-23a oil ring |
| 4100.1836.01 | K3131-27a 小 round nut (左旋) |
| 4100.1839.01 | K3131-28a 小 round nut (右旋) |
| 4100.1840.01 | K3131-29a frame 外密封盖 |
| 4100.1843.01 | K3131-31a retaining ring |
| 4100.1844.01 | K3131-32a frame 外 seal ring ( sheave 端) |
| 4100.1856.01 | K3131-47a frame 外 seal ring ( flywheel 端) |
| 4100.1865.01 | K3131-9a eccentric shaft |
| 4100.1890.01 | K3135-14 adjusting seat |
| 4100.1891.01 | K3135-15 toggle plate 座(一) |
| 4100.1892.01 | K3135-15A toggle plate 座(二) |
| 4100.1907.01 | K3135-30 大 pulley |
| 4100.1935.01 | K3135-61 spring tie rod |
| 4100.1986.01 | K3306.1SB frame |
| 4100.2061.01 | K1308.2-4 countershaft frame |
| 4100.2069.01 | K1308.3-2 eccentric sleeve |
| 4100.2072.01 | K1308.4-1 bowl bearing frame seal ring |
| 4100.2078.01 | K1308.4-7 bowl bearing frame |
| 4100.2080.01 | K1308.5-2 main shaft |
| 4100.2081.01 | K1308.5-3 cone body |
| 4100.2083.01 | K1308.5-5 press sleeve |
| 4100.2085.01 | K1308.5-7 main shaft 螺帽 |
| 4100.2087.01 | K1308.5-9 distributor plate |
| 4100.2106.01 | K1308.7-1 adjusting sleeve |
| 4100.2129.01 | K1309.3-2 eccentric sleeve |
| 4100.2131.01 | K1309.4-1 bowl bearing frame seal ring |
| 4100.2134.01 | K1309.4-4 bowl bearing frame |
| 4100.2135.01 | K1309.5-1 main shaft |
| 4100.2136.01 | K1309.5-2 cone body |
| 4100.2138.01 | K1309.5-4 压紧 nut |
| 4100.2139.01 | K1309.5-5 锁紧圈 |
| 4100.2141.01 | K1309.5-7 distributor plate 座 |
| 4100.2142.01 | K1309.5-8 distributor plate |
| 4100.2144.01 | K1309.7-1 adjusting sleeve |
| 4100.2151.01 | K1312.10-1 大 pulley |
| 4100.2152.01 | K1312.10-2 大 taper sleeve |
| 4100.2153.01 | K1312.10-3 小 pulley |
| 4100.2154.01 | K1312.10-4 小 taper sleeve |
| 4100.2168.01 | K1312.1-4 main shaft sleeve |
| 4100.2179.01 | K1312.1-7 U形 screw backing plate 10 |
| 4100.2186.01 | K1312.2-4 frame 底盖 |
| 4100.2195.01 | K1312.3-1 锁紧环 |
| 4100.2197.01 | K1312.3-3 支承 sleeve |
| 4100.2199.01 | K1312.3-5 防尘密封胶圈 |
| 4100.2204.01 | K1312.4-1 adjusting sleeve |
| 4100.2205.01 | K1312.4-2 调整帽 seal ring |
| 4100.2207.01 | K1312.5-1 countershaft frame |
| 4100.2212.01 | K1312.5-3 集油器 |
| 4100.2213.01 | K1312.5-4 垫 |
| 4100.2214.01 | K1312.5-5 O-ring Ⅰ |
| 4100.2216.01 | K1312.5-7 甩油环 |
| 4100.2219.01 | K1312.6-1 eccentric sleeve |
| 4100.2227.01 | K1312.7-1 bowl bearing frame |
| 4100.2232.01 | K1312.7-6 bowl bearing frame seal ring |
| 4100.2235.01 | K1312.8-1 main shaft |
| 4100.2236.01 | K1312.8-2 躯体 |
| 4100.2262.01 | K1319.1-3 press sleeve |
| 4100.2275.01 | K1320.1-9 main shaft sleeve |
| 4100.2279.01 | K1320.4-1 adjusting sleeve |
| 4100.2287.01 | K1322.1-2 填块 |
| 4100.2291.01 | K1323.2-1 adjusting sleeve |
| 4100.2301.01 | K1327.1-4 press sleeve |
| 4100.2322.01 | K1411.1-7 下圆板 |
| 4100.2324.01 | K1411.1-9 圆板 |
| 4100.2325.01 | K1411.2-1 countershaft |
| 4100.2331.01 | K1411.2-6 countershaft frame |
| 4100.2336.01 | K1411.3-2 eccentric sleeve |
| 4100.2338.01 | K1411.3-4 圆板 |
| 4100.2346.01 | K1411.4-3 dust seal |
| 4100.2350.01 | K1411.5-1 止动 gear |
| 4100.2352.01 | K1411.5-3 圆锥头 |
| 4100.2355.01 | K1411.5-6 cone body |
| 4100.2357.01 | K1411.5-8 main shaft |
| 4100.2392.01 | K1411.7-2 adjusting sleeve |
| 4100.2404.01 | K1413.1-1 cone body |
| 4100.2409.01 | K1413.2-2 adjusting sleeve |
| 4100.2412.01 | K1414.00.10 安装工具 |
| 4100.2420.01 | K1414.01.04A frame |
| 4100.2426.01 | K1414.01.09 圆盘 |
| 4100.2428.01 | K1414.01.12 下圆盘 |
| 4100.2441.01 | K1414.02.06 countershaft frame |
| 4100.2446.01 | K1414.03.02 eccentric sleeve |
| 4100.2449.01 | K1414.04.01 bowl bearing frame |
| 4100.2452.01 | K1414.04.05 dust seal |
| 4100.2453.01 | K1414.04.06 碗形 bearing |
| 4100.2457.01 | K1414.05.01 main shaft |
| 4100.2458.01 | K1414.05.02 cone body |
| 4100.2459.01 | K1414.05.03 球形圈 |
| 4100.2467.01 | K1414.06.01 支承 sleeve |
| 4100.2486.01 | K1414.06.20 防尘罩 |
| 4100.2514.01 | K1414.07.02 adjusting sleeve |
| 4100.2515.01 | K1414.07.03 rubber backing plate |
| 4100.2519.01 | K1414.07.07 垫 |
| 4100.2521.01 | K1414.07.10 防尘罩 |
| 4100.2536.01 | K1415.01.02 adjusting sleeve |
| 4100.2538.01 | K1415.01.10 防尘罩 |
| 4100.2540.01 | K1416.01.01 cone body |
| 4100.2546.01 | K1416.02.02 adjusting sleeve |
| 4100.2557.01 | K1417.1.0.01 frame |
| 4100.2560.01 | K1418.1.0.02 adjusting sleeve |
| 4100.2571.01 | K1417.1.0.14 下圆板 |
| 4100.2575.01 | K1417.1.0.16 圆板 |
| 4100.2597.01 | K1417.2.0.05 countershaft frame |
| 4100.2610.01 | K1417.3.0.04 eccentric sleeve |
| 4100.2612.01 | K1417.4.0.01 碗形 bearing |
| 4100.2615.01 | K1417.4.0.03 碗行 bearing 架 |
| 4100.2616.01 | K1417.4.0.04 dust seal |
| 4100.2621.01 | K1417.5.0.01 main shaft |
| 4100.2623.01 | K1417.5.0.02 球形圈 |
| 4100.2626.01 | K1417.5.0.04 cone body |
| 4100.2633.01 | K1417.5.0.08 圆锥头 |
| 4100.2642.01 | K1417.6.0.06 支承 sleeve |
| 4100.2644.01 | K1417.6.0.08 锁紧 nut |
| 4100.2674.01 | K1417.7.0.02 adjusting sleeve |
| 4100.2682.01 | K1417.7.0.10 漏斗装置 |
| 4100.2685.01 | K1417.8.0.01 上扇形板 |
| 4100.2692.01 | K1419.1.0.01 cone body |
| 4100.2697.01 | K1419.2.0.02 adjusting sleeve |
| 4100.2715.01 | K1420.1-1 frame |
| 4100.2731.01 | K1420.1-4 bush |
| 4100.2739.01 | K1420.1-7 圆板 |
| 4100.2740.01 | K1420.1-8 圆板 |
| 4100.2747.01 | K1420.2-4 countershaft frame |
| 4100.2748.01 | K1420.2-5 countershaft |
| 4100.2754.01 | K1420.3-2 eccentric sleeve |
| 4100.2759.01 | K1420.4-2 bowl bearing frame |
| 4100.2765.01 | K1420.5-1 main shaft |
| 4100.2767.01 | K1420.5-2 cone body |
| 4100.2768.01 | K1420.5-3 球形圈 |
| 4100.2791.01 | K1420.6-11 锁紧 nut |
| 4100.2813.01 | K1420.7-2 adjusting sleeve |
| 4100.2815.01 | K1420.7-4 漏斗装置 |
| 4100.2818.01 | K1420.7-7 rubber backing plate |
| 4100.2826.01 | K1421.1.-2 adjusting sleeve |
| 4100.2829.01 | K1422.1-1 cone body |
| 4100.2834.01 | K1422.2-2 adjusting sleeve |
| 4100.2878.01 | K1423.13.3 安装工具 |
| 4100.2883.01 | K1423.1-6 圆板 |
| 4100.2886.01 | K1423.1-8 圆板 |
| 4100.2887.01 | K1423.1-9 上圆板 |
| 4100.2908.01 | K1423.2-5 countershaft frame |
| 4100.2911.01 | K1423.2-8 oil slinger |
| 4100.2914.01 | K1423.3-2 空 eccentric shaft |
| 4100.2917.01 | K1423.3-5 偏重圈 |
| 4100.2918.01 | K1423.4-1 bowl bearing frame |
| 4100.2921.01 | K1423.4-4 bowl bearing frame seal ring |
| 4100.2926.01 | K1423.5-1 cone body |
| 4100.2927.01 | K1423.5-3 main shaft |
| 4100.2929.01 | K1423.5-2 mantle |
| 4100.2930.01 | K1423.5-4 press sleeve |
| 4100.2931.01 | K1423.5-5 分配盘 |
| 4100.2960.01 | K1423.6-5 锁紧环 |
| 4100.2963.01 | K1423.6-7 支承 sleeve |
| 4100.2974.01 | K1423.7-1 concave (bowl liner) |
| 4100.2975.01 | K1423.7-2 adjusting sleeve |
| 4100.2977.01 | K1423.7-4 shim |
| 4100.2978.01 | K1423.7-5 shim |
| 4100.2990.01 | K1424.1-2 mantle |
| 4100.2991.01 | K1424.1-3 cover plate |
| 4100.2992.01 | K1424.1-4 分配盘 |
| 4100.2994.01 | K1424.2-1 concave (bowl liner) |
| 4100.2995.01 | K1424.2-2 adjusting sleeve |
| 4100.3014.01 | K1425.2-1 bowl bearing frame |
| 4100.3019.01 | K1425.2-6 碗形 bearing seal ring |
| 4100.3020.01 | K1425.3-1 cone body |
| 4100.3029.01 | K1432.2-1 bowl bearing frame |
| 4100.3031.01 | K1432.2-3 O-ring |
| 4100.3034.01 | K1432.2-6 bowl bearing frame seal ring |
| 4100.3035.01 | K1432.3-1 main shaft |
| 4100.3036.01 | K1432.3-2 cone body |
| 4100.3050.01 | K1435.2-1 bowl bearing frame |
| 4100.3055.01 | K1435.2-6 bowl bearing frame seal ring |
| 4100.3056.01 | K1435.3-1 main shaft |
| 4100.3057.01 | K1435.3-2 cone body |
| 4100.3064.01 | K1438.10.1 motor 底盘 |
| 4100.3222.01 | K1420.1.1.0序3 锌炉管光20×1000 |
| 4100.3275.01 | K1312.2序7 frame 底盖垫φ570×φ457×1 |
| 4100.3278.01 | K1312.7序8 packing 13×13×3430 |
| 4100.3502.01 | K1320.10-4 小 pulley |
| 4100.3503.01 | K1320.10-5 小 taper sleeve |
| 4100.3510.01 | K1320.12.1 motor 底盘 |
| 4100.3573.01 | K1320.3-1 锁紧环 |
| 4100.3576.01 | K1320.3-4 支承 sleeve |
| 4100.3585.01 | K1320.5-10 O-ring Ⅰ |
| 4100.3591.01 | K1320.5-3 O-ring Ⅱ |
| 4100.3595.01 | K1320.5-7 集油器 |
| 4100.3596.01 | K1320.5-8 甩油环 |
| 4100.3599.01 | K1320.6-2 eccentric sleeve |
| 4100.3613.01 | K1320.7-3 bowl bearing frame |
| 4100.3614.01 | K1320.7-4 bowl bearing frame seal ring |
| 4100.3618.01 | K1320.8-1 main shaft |
| 4100.3619.01 | K1320.8-2 躯体 |
| 4100.3633.01 | K1327.3-1 躯体 |
| 4100.4341.01 | K5108.4-6 轴(二) |
| 4100.4358.01 | K5803.1.3-5 main shaft |
| 4100.4359.01 | K5806II.3-10 main shaft |
| 4100.4578.01 | H-M31412000 countershaft |
| 4100.4579.01 | H-M41412000 countershaft |
| 4100.4582.01 | H-M41431000 countershaft frame |
| 4100.4591.01 | 36AF-3-02 带轮 |
| 4100.4646.01 | H-M31443000 垫 |
| 4100.4653.01 | H-47331000 shim |
| 4100.4669.01 | H-M41342000 碗形瓦垫 |
| 4100.4712.01 | H-M31141001 防尘盖 |
| 4100.4713.01 | H-M41141001 防尘盖 |
| 4100.4715.01 | H-M31141011 防尘盖 baffle plate |
| 4100.4794.01 | H-M35132000 固定 retainer ring |
| 4100.4826.01 | H-M41331000 活塞 |
| 4100.4886.01 | H-36AF-AP-31 接头 |
| 4100.4908.01 | H-45HDIS-S105B 均给板 |
| 4100.4990.01 | H-M31211001 eccentric sleeve |
| 4100.4991.01 | H-M41211001 eccentric sleeve |
| 4100.4995.01 | H-M41221701 eccentric sleeve bush |
| 4100.5000.01 | G-D351523120-A mantle |
| 4100.5001.01 | H-41523010 mantle |
| 4100.5003.01 | H-A31523015 mantle |
| 4100.5023.01 | H-M31611201 上部 frame |
| 4100.5024.01 | H-M41611201 上部 frame |
| 4100.5027.01 | H-M31651001 上部 frame bush |
| 4100.5028.01 | H-M41651001 上部 frame bush |
| 4100.5073.01 | H-M31521001 头部 nut |
| 4100.5074.01 | H-M41521001 头部 nut |
| 4100.5083.01 | H-31342000 碗形瓦垫 |
| 4100.5095.01 | H-M31111004 下部 frame |
| 4100.5096.01 | H-M41111004 下部 frame |
| 4100.5174.01 | H-41675001 油标尺 |
| 4100.5199.01 | H-M41524006 cone body |
| 4100.5202.01 | H-41612310 concave (bowl liner) |
| 4100.5204.01 | H-A31612313 concave (bowl liner) |
| 4100.5207.01 | H-M31621002 concave (bowl liner) 压紧环 |
| 4100.5208.01 | H-M41621002 concave (bowl liner) 压紧环 |
| 4100.5210.01 | H-31461001 涨紧 sleeve |
| 4100.5211.01 | H-41461001 涨紧 sleeve |
| 4100.5260.01 | H-M31513001 shaft sleeve |
| 4100.5261.01 | H-M41513000 shaft sleeve |
| 4100.5264.01 | H-M41451700 主机 pulley |
| 4100.5265.01 | G-M351511000 main shaft |
| 4100.5267.01 | H-45HDIS-S100 main shaft |
| 4100.5270.01 | H-M41511101 main shaft |
| 4100.6036.01 | K3900.3-5 板体 |
| 4100.6037.01 | K3904.1.2-11 板体 |
| 4100.6038.01 | K3905.5-12 板体 |
| 4100.6060.01 | K3903.8.1 蓖架 |
| 4100.6063.01 | K3900.5.1.0 篦架 |
| 4100.6074.01 | K3904.1.3-2 篦子架 |
| 4100.6442.01 | K3904.1.1.2.0 hammer disc |
| 4100.6444.01 | K3907.2.1(A) hammer disc |
| 4100.6445.01 | K3907.2.2(A) hammer disc |
| 4100.6446.01 | K3907.2.3(A) hammer disc |
| 4100.6447.01 | K3907.2.4(A) hammer disc |
| 4100.6448.01 | K3900.1.3.0 hammer disc (Ⅰ) |
| 4100.6449.01 | K3903.1.2.0 hammer disc (Ⅰ) |
| 4100.6450.01 | K3900.1.3.0A hammer disc (Ⅱ) |
| 4100.6451.01 | K3903.1.4.0 hammer disc (Ⅱ) |
| 4100.6464.01 | CR253.05-13 hammer 隔环(二) |
| 4100.6465.01 | CR253.05-5 hammer 隔环(一) |
| 4100.6466.01 | K3900.1-11 hammer shaft |
| 4100.6467.01 | K3907.2-7 hammer shaft |
| 4100.6469.01 | K3906.4-10 hammer shaft (1) |
| 4100.6471.01 | K3903.1-6 hammer shaft (Ⅰ) |
| 4100.6472.01 | K3904.1.1-15 hammer shaft (I) |
| 4100.6474.01 | K3906.4-11 hammer shaft (2) |
| 4100.6476.01 | K3903.1-7 hammer shaft (Ⅱ) |
| 4100.6477.01 | K3904.1.1-27 hammer shaft (II) |
| 4100.6478.01 | K3906.4-13 hammer shaft (3) |
| 4100.6488.01 | K3903.1.2-1 hammer shaft sleeve |
| 4100.6489.01 | K3903.1.4-1 hammer shaft sleeve |
| 4100.6494.01 | K3905A.5-1 从动辊体 |
| 4100.6495.01 | K3905A.5-4 从动辊轴 |
| 4100.6496.01 | K3905A.5-2 从动 sprocket |
| 4100.6498.01 | K3900.1-22 大V型带轮 |
| 4100.6501.01 | K3903.1-1 大带轮 |
| 4100.6502.01 | K3904.1.1-23 大带轮 |
| 4100.6503.01 | K3905A.3-2 大带轮 |
| 4100.6552.01 | K3907.2.2-1 retainer ring |
| 4100.6558.01 | K3904.1.3-4 挡块 |
| 4100.6559.01 | K3905.4-9 挡块 |
| 4100.6569.01 | K3904.1.2-2 retaining ring |
| 4100.6579.01 | K3900.6-22 挡条 |
| 4100.6580.01 | K3904.2-6 oil ring |
| 4100.6583.01 | K3904.2-5 oil slinger |
| 4100.6663.01 | K3905.2-14 backing plate |
| 4100.6677.01 | K3904.1.5-2 shim |
| 4100.6678.01 | K3905.2-2 shim |
| 4100.6728.01 | K3904.1.5-11 吊杆 |
| 4100.6740.01 | K3904.1.2-3 lifting ring nut |
| 4100.6744.01 | K3904.1.2-6 adjusting screw |
| 4100.6760.01 | PSJ-05-0709 顶丝 |
| 4100.6781.01 | CR253.05-4 端 hammer disc |
| 4100.6794.01 | K3903.1.1.0 端盘(Ⅰ) |
| 4100.6795.01 | K3904.1.1.3.0 端盘(I) |
| 4100.6796.01 | K3903.1.3.0 端盘(Ⅱ) |
| 4100.6797.01 | K3904.1.1.1.0 端盘(II) |
| 4100.6802.01 | K3907.2-3(A) 端 sleeve |
| 4100.6811.01 | K3900.6-4 法兰 |
| 4100.6815.01 | K3905.5-6 法兰 |
| 4100.6842.01 | K3905.2-11 方板 |
| 4100.6912.01 | K3900.1-6 flywheel |
| 4100.6914.01 | K3904.2-10 flywheel |
| 4100.6932.01 | K3900.6-3 cover plate |
| 4100.7793.01 | K3905.2-6 杠杆 |
| 4100.7794.01 | K3904.2-16 隔环 |
| 4100.7874.01 | K3905.6.7.0 横梁 |
| 4100.7937.01 | K3905A.4-5 减震胶块 |
| 4100.8070.01 | K3900.1-14 卡箍 |
| 4100.8071.01 | K3903.1-10 卡箍 |
| 4100.8073.01 | K3907.2-2 卡箍 |
| 4100.8116.01 | K3900.5-2 连板 |
| 4100.8121.01 | K3905.4-14 连杆 |
| 4100.8140.01 | K3904.1.3-13 轮轴 |
| 4100.8141.01 | K3905.4-16(A) 轮轴 |
| 4100.8281.01 | K3900.6-18 门杠 |
| 4100.8282.01 | K3900.6-21 门杠 |
| 4100.8301.01 | K3904.1.4.1-3 门轴 |
| 4100.8310.01 | K3903A.1-33 blind cover |
| 4100.8311.01 | K3904.1.1-4 blind cover |
| 4100.8338.01 | K3905.4-19 seal ring |
| 4100.8339.01 | K3905A.4-16 seal ring |
| 4100.8344.01 | K3903.1-2 seal ring (Ⅰ) |
| 4100.8346.01 | K3903.1-11 seal ring (Ⅱ) |
| 4100.8417.01 | PSJ-02 pulley 罩子 |
| 4100.8429.01 | K3903.3-1 breaker plate 板体 |
| 4100.8458.01 | K3905A.4-13 球面瓦 |
| 4100.8468.01 | CR253.02.06-1 扇形 liner plate (一) |
| 4100.8471.01 | K3905A.4-10 上衬瓦 |
| 4100.8537.01 | NCP35.2.1.2-1 sleeve (1) |
| 4100.8539.01 | NCP35.2.1.2-2 sleeve (2) |
| 4100.8550.01 | K3904.1.1-20 through cover |
| 4100.8561.01 | K3903A.1-3 through cover (Ⅰ) |
| 4100.8564.01 | K3903.1-12 through cover (Ⅱ) |
| 4100.8565.01 | K3903.1-31 through cover (Ⅳ) |
| 4100.8578.01 | K3904.1.3-16 carrier |
| 4100.8579.01 | K3905.4-10 carrier |
| 4100.8582.01 | K3900.5-1 托梁 |
| 4100.8594.01 | K3904.1.5-7 椭圆头 bolt |
| 4100.8678.01 | K3903.3-6 rubber spring (Ⅰ) |
| 4100.8681.01 | K3903.3-7 rubber spring (Ⅱ) |
| 4100.8789.01 | K3904.2-8 小带轮 |
| 4100.8791.01 | K3905A.3-1 小带轮 |
| 4100.8814.01 | K3900.6-2 wedge |
| 4100.8861.01 | K3906.1.2-1 压杆 |
| 4100.8875.01 | K3900.6-24 press ring |
| 4100.8916.01 | K3904.1.4-30 油缸 pin |
| 4100.8920.01 | K3904.1.4-40 油缸支轴 |
| 4100.9034.01 | K3904.1.5-3 栅门 |
| 4100.9056.01 | K3905.4-11 罩 |
| 4100.9082.01 | K3905A.4-4 支承圈 |
| 4100.9105.01 | K3904.1.2-8 支轴 |
| 4100.9106.01 | K3905.5-7 支轴 |
| 4100.9117.01 | K3904.1.5-1 support (1) |
| 4100.9118.01 | K3905.2-1 support (Ⅰ) |
| 4100.9121.01 | K3904.1.5-9 support (II) |
| 4100.9122.01 | K3905.2-9 support (Ⅱ) |
| 4100.9134.01 | K3904.1.3-14 中间挡块 |
| 4100.9135.01 | K3905.4-20 中间挡块 |
| 4100.9136.01 | K3904.1.3-15 中间垫块 |
| 4100.9137.01 | K3905.4-8 中间垫块 |
| 4100.9151.01 | K3900.2-2 轴 |
| 4100.9153.01 | K3903.7-10 轴 |
| 4100.9154.01 | K3904.2-9 轴 |
| 4100.9156.01 | K3907.3-2 轴 |
| 4100.9178.01 | K3900.1-19A bearing cap |
| 4100.9180.01 | K3903.1-4 bearing cap |
| 4100.9182.01 | K3904.2-2 bearing cap |
| 4100.9183.01 | K3905A.4-15 bearing cap |
| 4100.9188.01 | PSJ-0303 bearing cap |
| 4100.9190.01 | K3906.4-1 bearing cap (1) |
| 4100.9192.01 | K3904.1.1-7 bearing cap (I) |
| 4100.9193.01 | K3906.4-15 bearing cap (2) |
| 4100.9195.01 | K3904.1.1-19 bearing cap (II) |
| 4100.9199.01 | K3904.2-1 bearing housing |
| 4100.9218.01 | K3904.1.1-10 shaft sleeve |
| 4100.9223.01 | K3907.2.1-1(A) shaft sleeve |
| 4100.9225.01 | K3907.2.2-2(A) shaft sleeve |
| 4100.9231.01 | K3900.7-5 shaft sleeve (Ⅰ) |
| 4100.9239.01 | K3905A.4-3 主动辊体 |
| 4100.9240.01 | K3905A.4-19 主动辊轴 |
| 4100.9242.01 | K3905A.4-8 主动 sprocket |
| 4100.9243.01 | CR310A.02-1 main shaft |
| 4100.9245.01 | K3900.1-12 main shaft |
| 4100.9246.01 | K3903.1-17 main shaft |
| 4100.9247.01 | K3904.1.1-3 main shaft |
| 4100.9249.01 | K3907.2-8 main shaft |
| 4100.9250.01 | K3907.2-8(A) main shaft |
| 4100.9701.01 | C52545 base |
| 4100.9702.01 | C52546 摇板 |
| 4100.9712.01 | K3501.1-3A 筛条 |
| 4100.9715.01 | K4101.1-2 底 guard plate |
| 4100.9732.01 | K4103.1-1 底 guard plate |
| 4100.9740.01 | K4105.3.2 盲孔罩 |
| 4100.9754.01 | K4106us.1.2A 盲孔罩 |
| 4100.9764.01 | K4109.1.1 frame |
| 4100.9765.01 | K4109.1-1 side guard plate |
| 4100.9769.01 | K4109.2.1 通孔罩 |
| 4100.9771.01 | K4109.3.1 摇板 |
| 4100.9776.01 | K4113.1-1 side guard plate |
| 4100.9778.01 | K4113.2.1 筒架 |
| 4100.9783.01 | K4113.3.1 摇板 |
| 4100.9788.01 | K4114.1.2 筛条 |
| 4100.9789.01 | K4114.1-1 side guard plate (一) |
| 4100.9790.01 | K4114.1-2 底 guard plate |
| 4100.9884.01 | KS4102.1.1 frame |
| 4100.9886.01 | KS4102.1.2 筛条 |
| 4100.9887.01 | KS4102.1-1 side guard plate (一) |
| 4100.9888.01 | KS4102.1-2 底 guard plate |
| 4100.9890.01 | KS4102.2.1(B) 筒架 |
| 4100.9893.01 | KS4102.2-1(A) 连接板 |
| 4100.9911.01 | KS4102.3A 后 spring bracket |
| 4100.9934.01 | K4113.1.1 frame |
| 4100.9935.01 | K4102.1-4A 筛条 |
| 4200.1301.01 | K1202.1-19 4R铲刀 |
| 4200.1350.01 | K1203.1-22 铲刀 |
| 4200.1376.01 | K1202.1-20 大 base |
| 4200.1378.01 | K1202.1.10 大 base washer |
| 4200.1401.01 | K1202.1.11.1 foundation bolt |
| 4200.1630.01 | K1202.1.08-06 铜 sleeve |
| 4200.1631.01 | K1203.1.8-06 铜 sleeve |
| 4200.1682.01 | K1202.3.2 叶轮A |
| 4200.1683.01 | K1203.3.1 叶轮A |
| 4200.1741.01 | K1203.1.11.1 main-machine foundation bolt |
| 4200.1745.01 | K1202.1-10 main shaft |
| 4200.1866.01 | K1204.1.6.1 主机地脚螺杆 |
| 4200.2474.01 | K5187.7-1 gland |
| 4200.2577.01 | K5183.4-5 轴 |
| 4200.2718.01 | K5174.1.6左 涨紧板 |
| 4200.2719.01 | K5174.1.6右 涨紧板 |
| 4200.2729.01 | K1203.3.1 叶轮B |
| 4200.2730.01 | K1203.3.1 叶轮C |
| 4200.2740.01 | K1202.3.2 叶轮B |
| 4200.2741.01 | K1202.3.2 叶轮C |
| 4200.3004.01 | K3204-22A sheave |
| 4200.3016.01 | K3204-2Y movable jaw |
| 4200.3020.01 | K3204-4A flywheel |
| 4200.3027.01 | K3204.1C frame |
| 4200.3043.01 | K3204-5 eccentric shaft |
| 4200.3219.01 | K3107-9gz2 movable jaw |
| 4200.3236.01 | K3320.1 frame |
| 4200.3255.01 | K3107-12B eccentric shaft |
| 4200.3355.01 | K3105HA.1.1 frame |
| 4200.3549.01 | K3208-55a(特) flywheel |
| 4200.3630.01 | K3321-13 后墙 wedge |
| 4200.3645.01 | K3321.2-2 eccentric shaft |
| 4200.4035.01 | K4974.3A 导管 |
| 4200.4037.01 | K4974.1 导管盖 |
| 4200.4040.01 | K4974.20-1 motor 带轮 |
| 4200.4041.01 | K4974.20-4 motor 带轮 |
| 4200.4042.01 | K4974.20.1 motor 座 |
| 4200.4068.01 | K4974.23.1 固定转子板 |
| 4200.4073.01 | K4974.12.1 frame (1) |
| 4200.4074.01 | K4974.12.2 frame (2) |
| 4200.4093.01 | K4974.5 进料斗 |
| 4200.4094.01 | K4974.4 进料斗盖 |
| 4200.4117.01 | K4974.11-13 上 bush |
| 4200.4118.01 | K4974.15.3 上盖 |
| 4200.4119.01 | K4974.11-3 上密封盖 |
| 4200.4120.01 | K4974.11-1 上锥 bush |
| 4200.4130.01 | K4974.11-12 下密封盖 |
| 4200.4131.01 | K4974-4 rubber 板 |
| 4200.4132.01 | K4974-1 rubber 板(1) |
| 4200.4151.01 | K4974.11-8 gland |
| 4200.4161.01 | K4974.8 砧座环 |
| 4200.4162.01 | K4974.18 砧座支撑顶盖 |
| 4200.4164.01 | K4974.9 砧座支撑环 |
| 4200.4170.01 | K4974.11-2 轴 |
| 4200.4175.02 | K4974.11A 轴系装配 |
| 4200.4176.01 | K4974.11-10 主机带轮 |
| 4200.4177.01 | K4974.23-2 main shaft |
| 4200.4182.02 | K4975.1A 转子装配 |
| 4200.4183.01 | K4974.23 转子平衡器 |
| 4200.4185.01 | K4974.23-4 taper sleeve |
| 4200.4186.01 | K4974-9 taper sleeve (上部) |
| 4200.4187.01 | K4974-10 taper sleeve (下部) |
| 4200.4281.01 | K4972.2-14 上 bush |
| 4200.4285.01 | K4972.2-3 上密封盖 |
| 4200.4323.01 | K4972.2-2 轴 |
| 4200.4338.01 | K4973.1.1 转子壳 |
| 4200.4339.01 | K4972.21 转子平衡器 |
| 4200.4386.01 | K4976.6.2 motor 座 |
| 4200.4487.01 | K4976.2 砧座环 |
| 4200.4490.01 | K4976.3 砧座支撑环 |
| 4200.4497.01 | K4976.4-12 轴 |
| 4200.4501.01 | K4976.4A 轴系装配 |
| 4200.4506.01 | K4977.1A 转子 |
| 4200.4509.01 | K4977.1.1 转子壳 |
| 4200.4567.01 | K1312.2.1-1 上法兰 |
| 4200.4569.01 | K1312.2.1-5 中心铸件 |
| 4200.4631.01 | K3903.1.1-2 collar |
| 4200.4808.01 | K1602.01-8B 填圈 |
| 4200.4810.01 | K1602.01-06 上 frame liner plate sleeve |
| 4200.4812.01 | K1602.01-04 顶盖 |
| 4200.4813.01 | K1602.01-03A concave (bowl liner) |
| 4200.4814.01 | K1602.01-03B concave (bowl liner) |
| 4200.4815.01 | K1602.01-03C concave (bowl liner) |
| 4200.4816.01 | K1602.01-03D concave (bowl liner) |
| 4200.4817.01 | K1602.01-03E concave (bowl liner) |
| 4200.4818.01 | K1602.01-03F concave (bowl liner) |
| 4200.4819.01 | K1602.01-03G concave (bowl liner) |
| 4200.4835.01 | K1602.03-1 shaft sleeve |
| 4200.4840.01 | K1602.03-3 头部 nut (外部) |
| 4200.4845.01 | K1602.03-8A mantle |
| 4200.4846.01 | K1602.03-8B mantle |
| 4200.4847.01 | K1602.03-8C mantle |
| 4200.4848.01 | K1602.03-8D mantle |
| 4200.4849.01 | K1602.03-8E mantle |
| 4200.4850.01 | K1602.03-8F mantle |
| 4200.4854.01 | K1602.04-11 bearing cap II |
| 4200.4870.01 | K1602.05-2 碗形瓦垫 |
| 4200.4880.01 | K1602.07-3 eccentric sleeve |
| 4200.4953.01 | K1601.01-04 顶盖 |
| 4200.4968.01 | K1601.03-02 main shaft sleeve |
| 4200.4971.01 | K1601.03-05 外头部 nut |
| 4200.4997.01 | K1601.05-05 碗形瓦垫 |
| 4200.5004.01 | K1601.07-1 eccentric sleeve |
| 4200.5137.01 | K1328.1-8 press sleeve |
| 4200.5138.01 | K1328.1-9 main shaft sleeve |
| 4200.5195.01 | K1328.4-1 锁紧 tie rod 托2 |
| 4200.5196.01 | K1328.4-4 锁紧 tie rod 托1 |
| 4200.5313.01 | K1320.5-9A countershaft |
| 4200.5451.01 | K31X08-21 sheave |
| 4200.5462.01 | K31X08-6 movable jaw |
| 4200.5466.01 | K31X08-14 flywheel |
| 4200.5471.01 | K31X08HG.1 frame |
| 4200.5482.01 | K31X08-12 eccentric shaft |
| 4200.5864.01 | K3131-46a bearing housing ( flywheel 端) |
| 4200.5865.01 | K3131-24a bearing housing ( sheave 端) |
| 4200.5867.01 | K4114.1-5L side guard plate (二)左 |
| 4200.5868.01 | K4114.1-5R side guard plate (二)右 |
| 4200.5879.01 | K31X04HG.1a frame |
| 4200.5959.01 | K3105HA.1-4A bearing housing ( sheave 端) |
| 4200.5962.01 | K3105HA.1-7A 连接板 |
| 4200.5963.01 | K3105HA.1-8 bearing housing ( flywheel 端) |
| 4200.5966.01 | K3105HA.2-11A eccentric shaft |
| 4200.5980.01 | K4114.2.3 bearing housing |
| 4200.6153.01 | K4961.06.01a 转子架焊接 |
| 4200.6161.01 | K4961.06.02a wear tip |
| 4200.6312.01 | K3321-17a toggle plate 座 base |
| 4200.6327.01 | K3321.2-1b movable jaw |
| 4200.6330.01 | K3321.2-11a 带轮 |
| 4200.6331.01 | K3321.2-12a flywheel |
| 4200.6363.01 | K1601.01-05 上 frame bush |
| 4200.6375.01 | K1601.01-08A 填圈 |
| 4200.6376.01 | K1601.01-08B 填圈 |
| 4200.6377.01 | K1601.03-04A mantle |
| 4200.6378.01 | K1601.03-04B mantle |
| 4200.6379.01 | K1601.03-04C mantle |
| 4200.6380.01 | K1601.03-04D mantle |
| 4200.6410.01 | K3100.2 pressing block (一) |
| 4200.6416.01 | K3100.6A 调整螺杆 |
| 4200.6425.01 | K3100-6 movable jaw |
| 4200.6426.01 | K3100-13 eccentric shaft |
| 4200.6431.01 | K3100-14A shaft sleeve (Φ40) |
| 4200.6433.01 | K3100-2 side liner |
| 4200.6434.01 | K3100-20 shaft sleeve (Φ32) |
| 4200.6439.01 | K3100-3 bearing cap |
| 4200.6440.01 | K3100-4 pressing block (二) |
| 4200.6442.01 | K3100-16 movable jaw end cover |
| 4200.6443.01 | K3100-17A end cover (一) |
| 4200.6444.01 | K3100-19A end cover (二) |
| 4200.6465.01 | K3100.5A 横梁轴 |
| 4200.6467.01 | K3100-8 横梁 |
| 4200.6523.01 | paper gasket φ870×φ650 |
| 4200.6603.01 | K3103-17A flywheel |
| 4200.6604.01 | K3103-41B sheave |
| 4200.6605.01 | K3103H.1A frame |
| 4200.6665.01 | K3611BSZ.2.1 反击面板 |
| 4200.6672.01 | K3611BSZ.3.2 反击面板 |
| 4200.6674.01 | K3611BSZ.4.1 转子架 |
| 4200.6768.01 | K3906.3.1 篦子架 |
| 4200.6822.01 | K3906.3-9 托梁 |
| 4200.6850.01 | K3906.4-9-1(A) retainer ring |
| 4200.6903.01 | KS4102.2-8(A) bearing housing |
| 4200.6904.01 | KS4102.1-3L side guard plate (二)左 |
| 4200.6905.01 | KS4102.1-3R side guard plate (二)右 |
| 4200.6958.01 | K3124-12C flywheel |
| 4200.6959.01 | K3124-2C sheave |
| 4200.7000.01 | K3322-32 H型钢HM300×200 (右) |
| 4200.7001.01 | K3322-33 H型钢HM300×200 (左) |
| 4200.7002.01 | K3322-9 侧板内板 |
| 4200.7005.01 | K3322.11 motor 座 |
| 4200.7006.01 | K3322.11-2 motor 座侧板 |
| 4200.7008.01 | K3322.11-6 motor 座筋板2 |
| 4200.7013.01 | K3322.11-1 motor 座上板 |
| 4200.7014.01 | K3322.11-3 motor 座支撑板 |
| 4200.7047.01 | K3322.1.6-2 frame support 竖板 |
| 4200.7080.01 | K3322.1-3 右侧墙 |
| 4200.7089.01 | K3322.1-4 左侧墙 |
| 4200.7127.01 | K3306YA.1A frame |
| 4200.7182.01 | K31X10.1.00B frame |
| 4200.7265.01 | K3320-2b bearing housing |
| 4200.7274.01 | K31X04.HG.1A frame |
| 4200.7355.01 | K3900.1-27A bearing housing |
| 4200.7356.01 | K3904.1.1-24 bearing housing (II) |
| 4200.7357.01 | K3904.1.1-2 bearing housing (I) |
| 4200.7360.01 | K3903.1-18 bearing housing |
| 4200.7362.01 | K3905A.4-18 bearing housing |
| 4200.7364.01 | PSJ-0304 bearing housing |
| 4200.7366.01 | K3906.4-6 bearing housing (1) |
| 4200.7367.01 | K3906.4-14 bearing housing (2) |
| 4200.7569.01 | K31X01-7A eccentric shaft |
| 4200.7674.01 | K4204.5.2-2 压簧 |
| 4200.7880.01 | K4601.1 上 frame |
| 4200.7952.01 | K4950.2.1 砧座环 |
| 4200.7958.01 | K4952.2.1 料架 |
| 4200.8450.01 | NCP23.2.2-12(A) 外 hammer disc (二) |
| 4200.8457.01 | NCP23.2.2-4(A) 外 hammer disc (一) |
| 4200.8461.01 | NCP23.2.2-8 (A) 内 hammer disc |
| 4200.8515.01 | K3321.2-7 固定端 bearing housing |
| 4200.8516.01 | K3321.2-8 游动端 bearing housing |
| 4200.8889.01 | K3105HA.2.2a movable jaw |
| 4200.8893.01 | K3101-1A frame |
| 4200.9223.01 | K5108.3-10(G) 轴 |
| 4200.9527.01 | K3322-13A 后墙 wedge |
| 4200.9535.01 | K3322.1-2A 后墙 |
| 4200.9536.01 | K3322.1.6A frame support |
| 4200.9537.01 | K3322.1.6-1A frame support 底板 |
| 4200.9539.01 | K3322.2-1A movable jaw |
| 4200.9541.01 | K3322.2-7a 固定端 bearing housing |
| 4200.9542.01 | K3322.2-8a 游动端 bearing housing |
| 4200.9555.01 | K3322.1A frame |
| 4200.9956.01 | K3602.02JZ-2 liner plate 350×350 |
| 5100.0252.01 | K4974.11-4 bearing housing |
| 5100.0254.01 | K4976.4-4 bearing housing |
| 8100.0322.01 | GB41 nut M24 |
Send your part-number list and delivery address; we will check stock and drawings and reply within 24 hours with unit price, lead time and export documentation.