All part numbers and descriptions for this machine, grouped by assembly — 184 items. We verify against drawings before shipping to avoid mismatch.
Items are grouped by assembly. Use the search box to filter the whole page by part number or description.
| Part No. | Description |
|---|---|
| liner plate 装配 | |
| 3100.1804.01 | 上盖装配 |
| 3100.2638.01 | 轴系装配 |
| 3100.2639.01 | 砧座环装配 |
| 3100.2640.01 | motor 座装配 |
| 4200.4002.01 | 保护 sleeve |
| 4200.4035.01 | 导管 |
| 4200.4036.01 | 导管衬 |
| 4200.4037.01 | 导管盖 |
| 4200.4054.01 | 分料斗 |
| 4200.4055.01 | distributor plate |
| 4200.4070.01 | 管夹 |
| 4200.4075.01 | frame 装配 |
| 4200.4093.01 | 进料斗 |
| 4200.4094.01 | 进料斗盖 |
| 4200.4096.01 | 进料管衬 |
| 4200.4097.01 | 进料管垫 |
| 4200.4098.01 | 进料管 shim |
| 4200.4131.01 | rubber 板 |
| 4200.4132.01 | rubber 板 (1) |
| 4200.4165.01 | 支板 (1) |
| 4200.4166.01 | 支板 (2) |
| 4200.4167.01 | 止动杆 |
| 4200.4180.01 | 转子底板 |
| 4200.4182.02 | 转子装配 |
| 4200.4183.01 | 转子平衡器 |
| 4200.4186.01 | taper sleeve (上部) |
| 4200.4187.01 | taper sleeve (下部) |
| 8100.0042.01 | bolt M16×45 |
| 8100.0045.01 | bolt M20×110 |
| 8100.0078.01 | nut M20 |
| 8100.0317.01 | nut M16 |
| 8100.0337.01 | bolt M10×35 |
| 8100.0348.01 | bolt M16×35 |
| 8100.0742.01 | nut M10 |
| 8100.0783.01 | bolt M10×40 |
| 8100.0796.01 | bolt M16×110 |
| 8100.2698.01 | spring washer 10 |
| 8100.2699.01 | spring washer 16 |
| 8100.2700.01 | spring washer 20 |
| 8100.2729.01 | screw M24×40 |
| 8100.2740.01 | 内六角圆柱头 screw M20×60 |
| 8100.2741.01 | 内六角圆柱头 screw M20×90 |
| 8100.2742.01 | 内六角圆柱头 screw M30×100-左 |
| 8100.2746.01 | 平垫30 |
| 8100.2824.01 | 星形手柄D63 |
| Part No. | Description |
|---|---|
| 4200.4028.01 | Vd seal ring , Vd180A |
| 4200.4029.01 | bolt M16×80 |
| 4200.4157.01 | 罩 |
| 4200.4443.01 | 内 shaft sleeve |
| 4200.4453.01 | 上锥 bush |
| 4200.4459.01 | 外 shaft sleeve |
| 4200.4461.01 | gland |
| 4200.4479.01 | 下 bush |
| 4200.4497.01 | 下密封盖 |
| 4200.4499.01 | bearing NU2324/C5 |
| 4200.4499.01 | bearing 6324/C3 |
| 4200.4500.01 | shaft sleeve |
| 4200.7956.01 | 键C32×180 |
| 4300.6371.01 | 上密封盖 |
| 4300.7072.01 | 防护塞N114 |
| 4300.7177.01 | washer 8 |
| 5100.0254.01 | bearing housing |
| 8100.0155.01 | 止推 washer 115 |
| 8100.0155.01 | washer 16 |
| 8100.0158.01 | bolt M8×20 |
| 8100.0273.01 | 带轮 clamp plate |
| 8100.0302.01 | washer 16 |
| 8100.0355.01 | bolt M16×50 |
| 8100.0865.01 | 出脂槽 |
| 8100.1312.01 | round nut M115×2 |
| 8100.2707.01 | washer 30 |
| 8100.2761.01 | O O-ring 125× 115×5.7 |
| 8100.2767.01 | cylindrical pin A8×35 |
| 8100.2767.01 | bolt 16×45 |
| 8100.2767.01 | 上 bush |
| 8100.2821.01 | bolt M30×90 |
| 8100.2825.01 | 主机带轮 |
| 8100.2826.01 | 轴 |
| 8100.2833.01 | 键C32×120 |
| 8100.2835.01 | 键B56×140 |
| 8100.4619.01 | cylindrical pin A8×18 |
| Part No. | Description |
|---|---|
| 4200.4009.01 | liner plate (1) |
| 4200.4012.01 | liner plate (2) |
| 4200.4014.01 | liner plate (3) |
| 4200.4016.01 | liner plate (4) |
| 4200.4018.01 | liner plate (5) |
| 4200.4020.01 | liner plate (6) |
| 4200.4022.01 | liner plate (7) |
| 4200.4073.01 | frame (1) |
| 4200.4074.01 | frame (2) |
| 4200.4077.01 | 夹持杆 |
| 4200.4078.01 | 夹持杆 bolt |
| 4200.4079.01 | angle steel I |
| 4200.4081.01 | angle steel II |
| 4200.4083.01 | angle steel III |
| 4200.4084.01 | angle steel IV |
| 4200.4091.01 | 铰链 nut |
| 4200.4092.01 | 铰链 bolt |
| 4200.4101.01 | 门 (1) |
| 4200.4103.01 | 门 (2) |
| 4200.4147.01 | pin |
| 4200.4148.01 | pin |
| 8100.0050.01 | bolt M24×60 |
| 8100.0080.01 | nut M24 |
| 8100.0155.01 | washer 16 |
| 8100.0157.01 | washer 24 |
| 8100.0317.01 | nut M16 |
| 8100.0348.01 | bolt M16×35 |
| 8100.0742.01 | nut M10 |
| 8100.2698.01 | spring washer 10 |
| 8100.2724.01 | 开槽沉头 screw M10×40 |
| 8100.2725.01 | 开槽沉头 screw M16×50 |
| 8100.2727.01 | split pin 6.3× 36 |
| 8100.2734.01 | bolt M16×65 |
| 8100.2749.01 | 平 washer 24 |
| 8100.2760.01 | cylindrical pin 8×18 |
| Part No. | Description |
|---|---|
| liner plate 装配 | |
| 4200.4010.01 | liner plate (1) |
| 4200.4011.01 | liner plate (10) |
| 4200.4013.01 | liner plate (2) |
| 4200.4015.01 | liner plate (3) |
| 4200.4017.01 | liner plate (5) |
| 4200.4019.01 | liner plate (6) |
| 4200.4021.01 | liner plate (4) |
| 4200.4023.01 | liner plate (7) |
| 4200.4024.01 | liner plate (8) |
| 4200.4025.01 | liner plate (9) |
| 4200.4027.01 | 衬垫 |
| 4200.4032.02 | baffle plate |
| 4200.4050.02 | 防护盖 |
| 4200.4051.02 | wear block I |
| 4200.4052.02 | wear block II |
| 4200.4053.02 | wear block III |
| 4200.4055.01 | distributor plate |
| 4200.4076.01 | 夹板 |
| 4200.4096.01 | 进料管衬 |
| 4200.4105.01 | 门 (3) |
| 4200.4107.01 | 门 (4) |
| 4200.4116.01 | 上 liner plate |
| 4200.4118.01 | 上盖 |
| 4200.4128.01 | 下 liner plate |
| 4200.4148.01 | pin |
| 4200.4182.02 | 转子部件 |
| 4200.9203.01 | wear block IV |
| 4300.6396.01 | 外刀片 |
| 4300.7631.01 | 转子壳 |
| 8100.2727.01 | split pin 6.3×36 |
| 8100.2749.01 | 平 washer 24 |
| 8100.2757.01 | 星形手柄D63 |
| Part No. | Description |
|---|---|
| 4200.4032.02 | baffle plate |
| 4200.4050.02 | 防护盖 |
| 4200.4051.02 | wear block Ⅰ |
| 4200.4052.02 | wear block Ⅱ |
| 4200.4053.02 | wear block Ⅲ |
| 4200.4116.01 | 上 liner plate |
| 4200.4128.01 | 下 liner plate |
| 4200.9203.01 | wear block IV |
| 4200.9204.01 | 防护罩 |
| 4300.6396.01 | 外刀 |
| 4300.7631.01 | 转子壳 |
| 8100.0155.01 | washer 16 |
| 8100.0159.01 | washer 10 |
| 8100.0227.01 | washer 16 |
| 8100.0317.01 | nut M16 |
| 8100.0337.01 | bolt M10×35 |
| 8100.0355.01 | bolt M16×50 |
| 8100.1179.01 | washer 10 |
| 8100.2732.01 | bolt M12×20 |
| 8100.2733.01 | bolt M16×25 |
| 8100.2734.01 | bolt M16×65 |
| Part No. | Description |
|---|---|
| 4200.4010.01 | liner plate (1) |
| 4200.4011.01 | liner plate (10) |
| 4200.4013.01 | liner plate (2) |
| 4200.4015.01 | liner plate (3) |
| 4200.4017.01 | liner plate (4) |
| 4200.4019.01 | liner plate (5) |
| 4200.4021.01 | liner plate (6) |
| 4200.4023.01 | liner plate (7) |
| 4200.4024.01 | liner plate (8) |
| 4200.4025.01 | liner plate (9) |
| 8100.0317.01 | nut M16 |
| 8100.2699.01 | spring washer 16 |
| 8100.2726.01 | screw M16×35 |
Send part numbers and quantities; we will check stock and drawings and reply with unit prices, lead times and export shipping. Genuine part numbers remain available long term.