All part numbers and descriptions for this machine, grouped by assembly — 78 items. We verify against drawings before shipping to avoid mismatch.
Items are grouped by assembly. Use the search box to filter the whole page by part number or description.
| Part No. | Description |
|---|---|
| 3100.3043.01 | 启盖 bearing housing 总成 |
| 4300.6419.01 | 顶盖 guard plate |
| 4300.6420.01 | 周 guard plate |
| 4300.6426.01 | 下料衬环 |
| 4300.6446.01 | 进料护圈 |
| 4300.6447.01 | impact block I |
| 4300.6448.01 | impact block II |
| 4300.6451.01 | 分料锥 |
| 4300.6452.01 | impact block III |
| 4300.6453.01 | impact block IV |
| 4300.6454.01 | impact block V |
| 4300.6455.01 | 上流道板 |
| 4300.6456.01 | 下流道板 |
| 4300.6457.01 | 护圈 |
| 4300.6459.01 | 罩盖护管 |
| 4300.6462.01 | 进料口护圈 |
| 4300.6462.01 | 进料口护圈 |
| 4300.6463.01 | 动力单元 |
| 4300.6472.01 | 进料斗 |
| 4300.6473.01 | 防尘板 |
| 4300.6474.01 | 液压启盖臂 |
| 4300.6475.01 | 液压启盖座 |
| 4300.6477.01 | 调节板 |
| 4300.6479.01 | 布料盘 |
| 4300.6479.01 | 布料盘 |
| Part No. | Description |
|---|---|
| 4300.6442.01 | 转轮体 |
| 4300.6443.01 | 内刀头 |
| 4300.6444.01 | 外刀头 |
| 4300.6445.01 | 保 guard plate |
| 4300.6446.01 | 进料护圈 |
| 4300.6447.01 | impact block I |
| 4300.6448.01 | impact block II |
| 4300.6449.01 | 转轮连接座 |
| 4300.6450.01 | 转轮 clamp plate |
| 4300.6451.01 | 分料锥 |
| 4300.6452.01 | impact block III |
| 4300.6453.01 | impact block IV |
| 4300.6454.01 | impact block V |
| 4300.6455.01 | 上流道板 |
| 4300.6456.01 | 下流道板 |
| 4300.6457.01 | 护圈 |
| Part No. | Description |
|---|---|
| 3100.3028.01 | 检查门装配 |
| 4300.6412.01 | 出料仓焊接 |
| 4300.6413.01 | 破碎腔焊接 |
| 4300.6414.01 | 周 guard plate 挂板 |
| 4300.6419.01 | 顶盖 guard plate |
| 4300.6420.01 | 周 guard plate |
| 4300.6421.01 | 周 guard plate clamp plate |
| 4300.6422.01 | 门栓 |
| 4300.6424.01 | pin |
| 4300.6425.01 | pin |
| 4300.6426.01 | 下料衬环 |
| 4300.6427.01 | rubber 条 |
| 4300.6428.01 | 底部检修门 |
| Part No. | Description |
|---|---|
| 3100.3027.01 | 出料仓装配 |
| 3100.3029.01 | bearing housing 总成 |
| 3100.3030.01 | 转子总成 |
| 3100.3031.01 | 罩盖总成 |
| 3100.3032.01 | 进料仓总成 |
| 3100.3033.01 | motor 装配 |
| 3100.3034.01 | frame |
| 3100.3044.01 | 基础部 |
| 4200.6059.01 | 振动保护开关 |
| 4300.6407.01 | pin φ20×70 |
| 4300.7952.01 | 减震垫 |
| Part No. | Description |
|---|---|
| 4300.6431.01 | main shaft |
| 4300.6432.01 | bearing housing |
| 4300.6435.01 | 下 end cover |
| 4300.6436.01 | 上 end cover |
| 4300.6437.01 | main shaft taper sleeve |
| 4300.6438.01 | 主机 pulley |
| 4300.6439.01 | 转轮 taper sleeve |
| 8100.4642.01 | bearing 6330M/C4, SKF |
| 8100.4836.01 | washer 150 |
| 8100.4837.01 | bearing NU330ECML/C4, SKF |
| Part No. | Description |
|---|---|
| 4300.6458.01 | 底板 |
| 4300.6459.01 | 罩盖护管 |
| 4300.6460.01 | 罩盖 |
Send part numbers and quantities; we will check stock and drawings and reply with unit prices, lead times and export shipping. Genuine part numbers remain available long term.